HSBK Categories HSBK Categories

 

Product filters Product filters

RS 660

$0.00
DID
In developing the Pro-Street VX Series, D.I.D focused on improving chain “Rigidity”. Traditionally, “Tensile Strength” has been used to measure the strength...
In stock

$2.50
Aprilia RS 660 Oil Drain Plug Crush Washer Sold individually Crush washers are supplied in either copper or aluminium depending on our stock. Designed...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.95 $8.76
HRT
Titanium Rear Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$14.95
OEM Aprilia Oil Filter 857187 Fits '09-'21 RSV4 (all variants) '11-'21 Tuono V4 (all variants) RS 660 (all) Tuono 660 (all)
In stock
Add to wish list

$14.95
Aprilia Wheel Speedo / ABS Ring Designed for the following bikes: RSV4 (all years) Tuono V4 (all years) RS660 (all years) Tuono 660 (all years)
In stock
Add to wish list

$14.95
Aprilia Rear Wheel Speedo / ABS Ring Designed for the following bikes: RSV4 (all years) Tuono V4 (all years) RS660 (all years) Tuono 660 (all years)...
In stock
Add to wish list

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$15.95 $12.76
HRT
Titanium Front Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$19.50 $17.94
Aprilia RS 660 Tuono 660 Secondary Air Solenoid Bypass Plug This plug and play device allows the removal of the secondary air solenoid without getting a...
In stock
Add to wish list

$19.50 $17.94
Aprilia RS 660 Tuono 660 Side Stand Bypass Elimination Plug The Side Stand Switch bypass is a plug and play device that bypasses the standard side stand...
In stock
Add to wish list

$19.50 $17.94
Aprilia RS 660 Tuono 660 EVAP Canister Bypass This kit allows the removal of the electronic purge valve and the components needed to completely remove the...
In stock
Add to wish list

$19.50 $17.94
Aprilia RS 660 Tuono 660 Rear Tail Light Bypass Plug This plug will eliminates the error light that you get on the dash when disconnecting the tail light...
In stock
Add to wish list

$19.50 $17.94
Aprilia RS 660 Tuono 660 Clutch Switch Bypass Plug This plug and play device allows the removal of the clutch switch Plug & Play, no need to cut wires...
In stock
Add to wish list

$19.50 $17.94
Aprilia RS 660 Tuono 660 Rear Brake Light Switch Bypass Plug Key Features: Bypass the rear brake light switch without any lights on the dash Plug &...
In stock
Add to wish list

$19.50
ABS Pump sealing plug with o-ring Set of 4 Fits bikes with M10x1.0 Banjo Fittings Note: Offroad / Race use only
In stock
Add to wish list

$19.95 $15.96
HRT
HRT Aprilia Titanium Front Sprocket Race Spec Bolt M10X1.25X25 Titanium is the strongest when compared to other metals. Its unsurpassed...
In stock
Add to wish list

$22.95
11.5 mm fits most metric / sportbike wheels 8.5 mm fits most aftermarket wheels & Italian motorcycles Billet aluminum construction Makes checking tire...
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$24.70 $22.23
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$24.95
Designed exclusively for road race competition, proven by the fastest MotoGP teams Dual-compound design with firm inner and softer outer compound for...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$25.00
Aprilia RSV4 (09-20) Tuono V4 (12-20) RS 660 Tuono 660 OEM Tank Pad Guard Original Aprilia tank pad Helps prevent your tank from getting...
In stock
Add to wish list

$25.00
Aprilia RSV4 (09-20) Tuono V4 (12-20) RS 660 Tuono 660 OEM Tank Pad Guard Original Aprilia tank pad Helps prevent your tank from getting...
In stock
Add to wish list

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M18x1.5x12 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$29.98
Evotech Performance’s paddock stand bobbins are a must have motorcycle maintenance accessory. Manufactured in the U.K. CNC Machined from a high...
In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$34.95
Aprilia logo wheel stickers
In stock
Add to wish list

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$37.70 $33.93
Melotti Racing Aprilia RSV4 Tuono V4 RS 660 Dash Cover Scratch Proof Film & Activator To be used with the Melotti Racing Impact Absorber Billet Dash Cover
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$39.95
Evotech Performance footrest blanking plates are CNC from aircraft grade aluminium. Remove the original pegs and install our plates to full the void and...
In stock
Add to wish list

$39.95
Set (4) Included 3 Pcs front headlight and taillight Printed realistic looking headlight decals to fit race / track bodywork of the Aprilia RSV4 2021 & Up...
In stock
Add to wish list

$39.95 $31.96
HRT
Upgrade your bike with a set of our titanium chain adjusters. You'll benefit from a 45-50% weight saving over the standard steel fasteners and improve the...
In stock
Add to wish list

$44.95
Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today. Superlite front...
In stock

$44.95
Gandini front sprocket are made of 18NICRMO5 steel, hardened and heat treated with an isotropic finish. The production is controlled by CNC machinery and...
In stock

$45.50 $40.95
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$49.40 $45.45
Eliminates the Air Re-circulation system on the RS 660 / Tuono 660 for better EGA readings especially during sweep style dyno tuning. The kit consists of...
In stock
Add to wish list

$49.40 $44.46
Spider Universal 14mm Fork Pre-Load Adjusters 2 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$49.95
Features of EP Rear Spindle Bobbins for the Aprilia RS660 Spindle Bobbin fixed on the driveline side Protects the costly swing arm and sprocket carriers...
In stock
Add to wish list

$49.95
Key Features of EP Front Spindle Bobbins Crash Protection for the Aprilia RS660 Aluminium spacer covered by nylon bobbin head Stainless Steel spindle rod...
In stock
Add to wish list

$49.95
Aprilia RS 660 Tuono 660 OEM Tank Pad Guard Original Aprilia tank pad Helps prevent your tank from getting scratching from belt and jackets....
In stock
Add to wish list

$49.95
Aprilia RS 660 Tuono 660 OEM Kayaba Fork Seal Kit Includes all parts seen in the photo Fork seal dimensions are approximately 41x53x8 Complete for...
In stock
Add to wish list

$50.70 $45.63
Designed to replace the OEM steering stops on Race / Track bikes Limits steering radios on Race / Track bikes Official supplier of several MotoGP and...
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$54.95
Dashboard USB socket for charging electronic devices, including bracket for installation on the vehicle. It does not allow data transfer with the electronic...
In stock
Add to wish list

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$56.93 $52.38
Safe and Secure - The solid chain guard is designed with safety in mind, protecting the rider(s) from the motorcycles drive system. Budget Friendly -...
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$58.50 $52.65
Spider Universal 14mm Fork Pre-Load Adjuster 1 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$59.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$60.00
OEM Aprilia Cush Drive Rubber - 2B006242 Set of 5
In stock
Add to wish list

$62.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Made in Italy
In stock
Add to wish list

$63.70 $57.33
Billet sprocket cover combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact, they’re...
In stock
Add to wish list

$64.95
Tank protection in 3D material to guarantee surface protection of the tank reducing pilot slippage. The kit is composed by left and right protection.
In stock
Add to wish list

$64.95
Designed with a lip that keeps them attached to the wheel making front and rear wheel changes faster and more efficient. Machined from solid billet...
In stock
Add to wish list

$69.95
Spiegler Performance quality that you have come to expect. Non ABS lines designed for race / track use only New crush washers are included Can be fully...
In stock

$69.95
TechSpec’s flag ship tank grip material, Snake Skin, has over twenty years of material development. It’s not easy bonding adhesive to rubber. TechSpec’s,...
In stock
Add to wish list

$69.95
RS 660 Custom number plates with or without your race number. 4 Total Decals Front Number Plate (1) Side Numbers (2) Rear Plate (1) Number plate...
In stock

$69.95 $64.35
Eliminates the Air Re-circulation system on the RS 660 / Tuono 660 for better EGA readings especially during sweep style dyno tuning. The kit consists of...
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$78.00 $70.20
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Sold in pairs Made in Itay
In stock
Add to wish list

$78.00 $70.20
Essential to limit the steering angle of racing bikes, with this racing component it is no longer necessary to use classic balancing weights. Composed...
In stock
Add to wish list

$79.95
The sprockets are made from solid, from forged extruded bar, in special hard anodized aluminum 7075-T6 alloy. Designed and built to lighten the...
In stock

$83.20 $74.88
Machined from solid Derlin / Aluminium 4 Pcs Set (Front + Rear) Made in Italy
In stock
Add to wish list

$84.50
Hand made in Italy Perfect hanger for Akrapovic and other exhaust systems Used by many race teams for lightness and durability
In stock

$84.95
Superlite RS8-RR Series alloy race sprockets are manufactured to be extremely light yet durable for big horsepower applications. If you're looking to shave...
In stock

$91.95
The optional aluminium muffler bracket is designed to be used with S-A6R2-HAPC - Racing Line (Carbon) and S-A6R1-APLC - Racing Line (Carbon) exhaust systems...
In stock
Add to wish list

$97.50 $89.70
2020+ Aprilia RS660 steering damper mount made from solid billet aluminum Works with any lateral style steering damper Includes 6mm bolts for...
In stock

$98.00
AIM
This kit comes with everything you need to mount your AiM Solo / Solo 2 / Solo DL / Solo DL 2 to your triple clamp on your Aprilia RSV4 / RS 660.
In stock
Add to wish list

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$99.95
Features of EP Radiator Guard for the Aprilia RS660 All aluminum light-weight construction engineered for easy, precise fit Hexagonal matrix hole-pattern...
In stock
Add to wish list

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$99.95
WRS
Windscreen made of high quality PMMA plexiglass DOT626 approved, the same material we use for the realization of the screens dedicated to the MotoGP and...
In stock

$99.95
Cruciata Aprilia RS 660 Fuel Tank Extension (21+) Designed to optimize the shape of the fuel tank for better ergonomics and less sliding forward under...
In stock
Add to wish list

$103.92
R-RACER SCREEN FOR APRILIA RS 660 2021 DIMENSIONS (LENGTH X WIDTH): 330 x 255 mm 70 mm. higher than the original Thickness: 3 mm The line of screens...
In stock

$106.60 $95.94
2020+ Aprilia RS660 steering damper mount made from solid billet aluminum Works with any lateral style steering damper Includes 6mm bolts for...
In stock

$108.00
AIM
AiM SOLO 2 DL Aprilia RSV4 / Tuono V4 ECU interface harness Aprilia RS 660 For these Aprilia models: RSV4 RR/RF from 2017 RS660 from 2021
In stock
Add to wish list

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$110.00 $99.00
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$110.00 $99.00
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$117.60 $94.08
DNA

The DNA High performance air filter is a high quality next generation multilayer cotton gauze oil impregnated air filter.

In stock
Add to wish list

$119.95
The Cox Racing Radiator Guard protects the Aprilia RS660 radiator from damage while allowing cooling air to pass through '“ and look good at the same time....
In stock

$122.20 $109.98
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$127.40 $114.66
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$130.00
OEM Aprilia Rear Sprocket Carrier - 2B006240 Sprocket nuts and spacers not inlcuded.
In stock
Add to wish list

$139.95
Spiegler Performance quality that you have come to expect. This is a SBK spec line that splits at the lower triple clamps. Designed for race / track use...
In stock

$143.00 $131.56
Aprilia RS 660 Tuono 660 Front Headlight Bypass Plug This plug and play device allows the removal of the front headlight without getting a warning light...
In stock
Add to wish list

$144.00
High quality 100% carbon fiber...
In stock
Add to wish list

$144.30 $132.76
Our kit dubbed "Kill switch" has the function of replacing the key lock on motorcycles destined for race use. It is supplied in combination with the KEY BOX...
In stock
Add to wish list

$146.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$150.00
Mechanical clutch lever for OEM clutch perch
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$159.00
Öhlins fork springs are developed specifically for Öhlins cartridge kits and front forks. But they are also in itself a great front end upgrade and as such...
In stock

$159.95
Aprilia Racing Tall Windscreen for 1 RS660
In stock
Add to wish list

$174.00
High quality 100% carbon fiber...
In stock
Add to wish list

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$182.00 $167.44
Memjet EVO power module for Aprilia RS 660 / Tuono 660 (MJ 001). The Memjet Evo power module is designed to improve the performance of fuel injection...
In stock
Add to wish list

$182.15
MIA allows the rider to connect, through Bluetooth, his iOS or Android smartphone to the motorbike’s on-board electronics. The Bluetooth headset/helmet...
In stock

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$184.95 $170.15
This seat designed for racing use, covered with a 3mm layer of high density special Mousse. This is the same material chosen by most MotoGP , Moto2, Moto3...
In stock
Add to wish list

$185.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound
In stock
Add to wish list

$189.95
Made in high quality materials it offer a continuous protection from dust and thanks to the breathable fabric it prevents condensation inside the cover as...
In stock
Add to wish list

$189.95
Saddle in 3D material offering a better riding comfort compared to the standard version
In stock
Add to wish list

$195.00
High quality 100% carbon fiber from a brand you trust. Our line of Carbon Fiber is the strongest, most flexible, & best looking...
In stock

$196.95 $181.19
Optional carbon fiber exhaust hanger for Akrapovic Exhaust System. Comes with hardware to attach to bike
In stock
Add to wish list

$219.90 $197.92
CRG
The RC2 is a brand new version of the on-the-fly position adjustable lever, designed for OEM style master cylinders. A worthy successor to the highly...
In stock

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$199.95
Designed to relocate the rear caliper to the bottom with option to make captive for faster / easier tire changes. Machined from solid billet...
In stock

$219.95
Super sleek and super strong design which fully integrates with the sporting lines of your Aprilia RS660. CNC machined from lightweight aircraft grade...
In stock
Add to wish list