HSBK Categories HSBK Categories

 

Product filters Product filters

S 1000 RR

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$58.50 $52.65
Spider Universal 14mm Fork Pre-Load Adjuster 1 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$49.40 $44.46
Spider Universal 14mm Fork Pre-Load Adjusters 2 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$19.50
ABS Pump sealing plug with o-ring Set of 4 Fits bikes with M10x1.0 Banjo Fittings Note: Offroad / Race use only
In stock
Add to wish list

$1,248.00 $1,123.20
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$122.20 $112.42
The secondary air injection system (PAIR) routes fresh air from the airbox to the exhaust system in order to aid the combustion of unburned fuel in the...
In stock
Add to wish list

$19.50 $17.94
ByPass to remove the error message on the dashboard when the rear light is disconnected. Key Features: Disable dashboard errors High...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$91.00 $81.90
I2M
CNC Dash Brackets make installing your I2M dash simple and effortless.
In stock

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$90.00
These S1000RR rear shock supports will replace the OEM eccentric supports that have a ± 2,5mm offset. Since the stock shock offers no length adjustments,...
In stock
Add to wish list

$200.00
BMW S1000RR 15-18 Racing Billet Swingarm Pivots Use these pivots to modify the wheelbase and swingarm angle of your S1000RR for fine tuning of antisquat....
In stock

$200.00
BMW S1000RR 12-14 Racing Billet Swingarm Pivots Use these pivots to modify the wheelbase and swingarm angle of your S1000RR for fine tuning of antisquat....
In stock

$100.00
Made from Premium 420 Stainless Steel. Extremely Light Weight Design. Over 1 lbs. rotating mass weight reduction = More RWHP Optimal Design for Maximum...
In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$41.60 $37.44
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Designed for track / racing use Made in Italy
In stock
Add to wish list

$295.95 $266.35
3D
All of our 3D chains are 120 link and come with a master link. FIVE CONCEPTS TO MAKE OUR IDEAL THREED CHAIN A REALITY Impressive Ultimate Plate Shape...
In stock

$317.95 $286.15
3D
Our Exclusive SX2 Ring leads to 30% reduction of friction (compared with our existing products). Chromium Carbide pin surface coating increases hardness...
In stock

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$41.60 $37.44
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Designed for track / racing use Made in Italy
In stock
Add to wish list

$41.60 $37.44
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Designed for track / racing use Made in Italy
In stock
Add to wish list

$41.60 $37.44
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Designed for track / racing use Made in Italy
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$53.63 $48.27

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$379.95 $349.55
This competition seat is designed for racing and covered with 3mm layer of high density special Mousse. This is the same material chosen by most MotoGP ,...
In stock
Add to wish list

$249.95 $229.95
This competition seat is designed for racing and covered with 3mm layer of high density special Mousse. This is the same material chosen by most MotoGP ,...
In stock
Add to wish list

$3,055.00 $2,749.50
I2M

Chrome PRO: designed for the most demanding pilot

In stock

$44.95
Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today. Superlite front...
In stock

$44.95
Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today. Superlite front...
In stock

$330.20 $303.78

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the 2D dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC machined...
In stock
Add to wish list

$101.40 $91.26
Made from Aerospace Grade Alloy Made in Italy
In stock
Add to wish list

$279.50 $251.55
Made from Aerospace Grade Alloy 55mm Diamater Bars are included Made in Italy
In stock
Add to wish list

$220.00 $198.00
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list