HSBK Categories HSBK Categories

 

Product filters Product filters

899 / 959 / 1199 / 1299 / V2

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$79.90
SKF
These SKF fork seals are commonly used in pro racing for their reduced friction while maintaining an OEM quality seal. Green fork seals have 20% reduced...
In stock
Add to wish list

$59.80 $53.82
Sold as a set Made in Italy
In stock
Add to wish list

$1.50
Ducati Oil Drain Plug Crush Washer Sold individually Crush washers are supplied in either copper or aluminium depending on our stock.
In stock

$39.90 $31.92
HRT
HRT Ducati Titanium Rear Swingarm Pinch Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$395.00
Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view below for the tool in...
In stock
Add to wish list

$495.00
Pneumatic Preload Adjuster for Ohlins TTX shocks: V2, ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an adapter). These type of...
In stock
Add to wish list

$19.50 $17.94
Rear light eliminator for Ducati Panigale 1299. Electronic eliminator to remove the error message on the dashboard when the rear light is disconnected....
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M14X1.5X12 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$349.00
ucati V2 Panigale Carbon Fiber Racing Rear Fender Hugger Produced in an autoclave in 100% carbon fiber, plain weave, matte surface finish
In stock
Add to wish list

$5,351.50 $4,816.35

Termignoni design and create motorcycle exhaust systems for race and road use at the highest levels.

In stock
Add to wish list

$336.70 $303.03
Ducabike Ducati V2 V4 Panigale Carbon Fiber Front Fender Produced in an autoclave in 100% carbon fiber, plain weave, matte surface finish
In stock
Add to wish list

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$452.40 $407.16
Developed for use in the SSP600, this kit complies with the FIM regulations and is adopted by the main teams competing with the Panigale V2 in the World...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$390.00
Developed with the Aruba & Warhorse HSBK Racing Ducati Team for the NextGen Panigale V2. Made of Aviofiber To be used with Febur FE1598 radiator. Fits...
In stock
Add to wish list

$5,655.00
Febur's radiators lower temperatures thanks to the increased surface and quality of the materials. After careful studies and design we are able to achieve...
In stock
Add to wish list

$127.40 $114.66
Specific wheel spacers for Melotti Racing “fast action” wheel axle, used by the main teams competing in the SSP and WSSP championships. Specs: This new...
In stock
Add to wish list

$240.38
Ducati Corse 1199 1299 V2 Panigale Carbon Fiber Racing Rear Lower Chain Guard The iconic Ducati design is combined with the strength and lightness of...
In stock
Add to wish list

$2,699.00
Featuring the race proven technology of our 30mm front fork cartridge kit, the compression and rebound damping systems are separated between the fork legs....
In stock
Add to wish list

$257.40 $236.81

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock

$253.50 $233.22
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$58.50 $52.65
Spider Universal 14mm Fork Pre-Load Adjuster 1 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$49.40 $44.46
Spider Universal 14mm Fork Pre-Load Adjusters 2 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$75.00
AIM
AiM Ducati Solo 2 / DL GPS Bike Harness Kit
In stock
Add to wish list

$45.00 $42.00
AIM
This kit comes with everything you need to mount your AiM Solo / Solo 2 / Solo DL / Solo DL 2 to your triple clamp on your Ducati V2 / V4
In stock
Add to wish list

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$249.00
Sold as a pair Ducati decals not included Matte Finish Made in Italy Note: Installed...
In stock

$495.00
Lightweight replica of OE subframe for racing purposes. Legal to use in all racing categories that require stock subframes. Manufactured from aerospace...
In stock
Add to wish list

$1,006.07
New Epotex fairings for Ducati Panigale V2. Epotex hulls, while representing our entry level range, have always been considered excellent in terms of value...
In stock
Add to wish list

$88.95
Fits variety of Ohlins damper.
In stock
Add to wish list

$19.50
ABS Pump sealing plug with o-ring Set of 4 Fits bikes with M10x1.0 Banjo Fittings Note: Offroad / Race use only
In stock
Add to wish list

$1,201.92
It includes fairings and a headlight fairing made of blank plastic material, complete with covers closing headlights and turn indicators housing....
In stock

$1,404.00 $1,263.60
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$221.00 $198.90
Made from Aerospace Grade Alloy & Carbon Fiber ¼ Quick turn release Made in Italy
In stock
Add to wish list

$481.00 $432.90
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$75.00
Fiberglass front fender. Can be used with verity of bodywork brands as well as the OEM fairings.
In stock
Add to wish list

$452.40 $416.21
Electronic RBW throttle control for Ducati V2 & V4 Designed for racing use Quicker reponse - less rotation that stock! Works with OEM or...
In stock

$269.10 $247.57
The handlebar switch are Plug and Play and specified for each motorbike. The removal of the std handlebar switch and the installation of the Jetprime one...
In stock

$49.14 $39.31
HRT
Titanium rear sprocket carrier nuts kit contains 5 or 6 (select from drop down menu) nuts which is made from solid CNC billet titanium and finished to a...
In stock

$39.00 $35.10
Complete with assembly instructions Interchangeable with the originals 5 or 6-piece kit External dimension increased compared to the original for...
In stock

$189.95 $151.96
HRT
Titanium Rear Right Large Hub Axle Nut Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$134.95 $107.96
HRT
Titanium Rear Left / Right Large Hub Axle Nut Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$42.95 $34.36
HRT
Titanium Front Axle Nut Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when you need strong...
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$91.00 $83.72
Jetyprime Ducati Panigale V2 Rain Light Conversion Kit Rain light conversion kit for Ducati Panigale V4. Plug and Play harness set that converts the rear...
In stock
Add to wish list

$15.95 $12.76
HRT
Titanium Front Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$10.95 $8.76
HRT
Titanium Rear Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$490.04 $441.04
Entirely machined from solid aluminum alloy with 3d technology Surface anodizing Compatible with dot 3/4 / 5.1 fluid (no mineral) Master...
In stock

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber for Solo WSSp dash has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined...
In stock
Add to wish list

$1,209.00 $1,088.10
Developed for use in the SSP600, this kit complies with the FIM regulations and is adopted by the main teams competing with the Panigale V2 in the World...
In stock
Add to wish list

$192.40 $173.16
Melotti Racing Ducati Panigale V2 Front Fork Potentiometer Bracket Support (Showa) Upper support, made in aluminium alloy, CNC machined and treated with...
In stock
Add to wish list

$153.40 $138.06
Melotti Racing Ducati Panigale V2 Front Wheel Speedo ABS Sensor Bracket Support (Showa) With the use of the Supersport “fast action” wheel axle to speed...
In stock
Add to wish list

$4,549.99 $4,094.99

Termignoni design and create motorcycle exhaust systems for race and road use at the highest levels.

In stock
Add to wish list

$4,958.80 $4,462.92

Termignoni design and create motorcycle exhaust systems for race and road use at the highest levels.

In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$16.64
Widely used in the Racing sector, it has been designed to preserve the bodywork from accidental leakage of fluid, as well as to protect the fluid against UV...
In stock

$70.24
Ducati Performance 899 959 1199 1299 V2 Carbon Fiber Tank Pad Original Ducati tank pad Helps prevent your tank from getting scratching from...
In stock
Add to wish list

$387.40 $356.41
The high standard quality imposed by Jetprime on its products has permitted to the company to be chosen as technical supplier for Althea BMW Racing, and the...
In stock
Add to wish list

$374.40 $344.45
The high standard quality imposed by Jetprime on its products has permitted to the company to be chosen as technical supplier for Althea BMW Racing, and the...
In stock
Add to wish list

$19.50 $17.94
Miniature plug-in side stand by-pass device allowing the side stand to be removed on track or race bikes. May be used on the following Ducati models 899...
In stock
Add to wish list

$118.30 $108.84
Eliminates the Air Re-circulation system Ducati V2 Panigale for better EGA readings especially during sweep style dyno tuning. The kit consists of a CNC...
In stock
Add to wish list

$19.50 $17.94
Rear light eliminator for Ducati Panigale V2 & V4. Electronic eliminator to remove the error message on the dashboard when the rear light is disconnected....
In stock
Add to wish list

$193.70 $178.20
Our kit dubbed "Kill switch" has the function of replacing the key lock on motorcycles destined for race use. It is supplied in combination with the KEY BOX...
In stock
Add to wish list

$19.50 $17.94
Jetprime Ducati V2 Panigale Secondary Air Solenoid Bypass Plug This plug and play device allows the removal of the secondary air solenoid without getting...
In stock
Add to wish list

$484.94
Carbon swingarm guard. The special plastic slider ensures effective protection in the case of sliding, while also standing out as a stylistic element. The...
In stock
Add to wish list

$432.54

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$663.00 $596.70
Special rearsets designed for the introduction of the Ducati into the WSS championship. Machined from solid billet aluminum Perfect anodized finish...
In stock

$146.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$59.95
Must be used with Superlite PCD-3 or PCD-4 billet aluminum "Quick Change" sprocket carrier Exclusive tooth profile for extended mileage output Induction...
In stock

$64.95
Must be used with Superlite PCD-3 or PCD-4 billet aluminum "Quick Change" sprocket carrier Exclusive tooth profile for extended mileage output Induction...
In stock
Add to wish list

$1,847.30
PANIGALE V2 955 2020 RACING TITANIUM WORK EXHAUST (R+L) WITH WELDED STAINLESS STEEL LINK PIPE
In stock
Add to wish list

$62.40 $57.41
Constructed in special plastic material by turning and milling. Replaces OEM throttle tube Made in Italy
In stock
Add to wish list

$69.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$129.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$326.23 $293.61

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$121.49 $109.34
Made from high quality PMMA plexiglass, DOT626 certified The screen is 2mm thick to maintain a light weight and flexibility which also makes it...
In stock

$999.95
Winner of the 2021 CIV National Trophy 600. Premium Ducati V2 WSS race / track fairing set. Lightweight, strong and with a superb fit and finish....
In stock

$300.00 $270.00
Melotti Racing’s Impact Absorber housing for the Ducati dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$449.00
68mm Stroke Ohlins's Road & Track Part No: SD 068 All hardware included to replace stock damper on all Panigale 899, 959, 1199, 1299, V2 & V4. An...
In stock
Add to wish list

$1,429.00
The TTX GP is our latest shock absorber for hypersport and sport bikes. It features the TTX twin tube technology but has been developed with the latest...
In stock

$99.95
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$87.00
Replacement rear sub loom made from high specification Raychem wire and sleeve including just the diagnostic connector and rear light. Turn signal and...
In stock
Add to wish list

$105.00
Small plug in modules enabling the standard 'DES' electronic fork adjusters to be disconnected and replaced without having error messages on the dashboard....
In stock
Add to wish list

$810.00
What does it do and what is Blip Box? This miniature module provides an fully programmable throttle 'auto blip' when ever a down-shift registered via...
In stock

$97.50
Mounting bracket kit for AIM Solo- 2 GPS lap timers/data loggers. Designed for the following models: Ducati 899 959, 1199 1299, V2, V4
In stock
Add to wish list

$1,138.80 $1,047.70
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock
Add to wish list

$1,138.80 $1,047.70
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock
Add to wish list

$1,241.50 $1,142.18
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$279.95 $257.55
Custom seat made on carbon fiber base designed for racing use. Special high-density 3mm neoprene like material which is the top choice of most MotoGP,...
In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$79.95

Snake Skin kit includes left and right tank grips, frame grips and center tank protector. This product is made in our Aggressive Adhesive.

In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$234.95 $211.45

Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$6,560.00 $6,000.00
22 years of exhaust manufacturing technology has gone into producing this Evolution Line exhaust, but despite this – just like Ducati in building the...
In stock
Add to wish list

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$23.80 $19.04
HRT
Titanium 5mm Caliper Spacers Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when you need...
In stock
Add to wish list

$330.20 $303.78
On all of the latest Ducati motorcycles, the throttle twist grip no longer has the classic spool with steel wiring but only a digital potentiometer. Our...
In stock
Add to wish list

$175.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock
Add to wish list

$49.40 $44.46
Sold as a set Made in Italy
In stock
Add to wish list

$845.00
The patented T Drive system allows the transfer of brake torque to transition more efficiently between the contact area of the rotor and carrier when...
In stock
Add to wish list

$185.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound
In stock
Add to wish list

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$295.95 $266.35
3D
All of our 3D chains are 120 link and come with a master link. FIVE CONCEPTS TO MAKE OUR IDEAL THREED CHAIN A REALITY Impressive Ultimate Plate Shape...
In stock

$317.95 $286.15
3D
Our Exclusive SX2 Ring leads to 30% reduction of friction (compared with our existing products). Chromium Carbide pin surface coating increases hardness...
In stock