HSBK Categories HSBK Categories

 

Product filters Product filters

899 / 959 / 1199 / 1299 / V2

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED turn...
In stock
Add to wish list

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED...
In stock
Add to wish list

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED...
In stock
Add to wish list

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED turn...
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$153.40 $138.06
Melotti Racing Ducati Panigale V2 Front Wheel Speedo ABS Sensor Bracket Support (Showa) With the use of the Supersport “fast action” wheel axle to speed...
In stock
Add to wish list

$149.95
All Flange Covers are 100% CNC machined in Huntington Beach California 6061-T6 aircraft grade aluminum with a military grade anodized finish Can be...
In stock

$146.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$144.10 $129.69

Termignoni design and create motorcycle exhaust systems for race and road use at the highest levels.

In stock

$139.98
Special 120-link, racing chain. Now availible in 520, 525, or 530 pitch Comes in "Ducati Red" color Designed to guarantee top efficiency and...
In stock

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound Pads are 7.9 mm thick total Replacement from part number 107A48649
In stock
Add to wish list

$136.50 $122.85
7075 billet made with 3D milling Desinged for large 6 hole carriers Ready to install Made in Italy
In stock

$134.95 $107.96
HRT
Titanium Rear Left / Right Large Hub Axle Nut Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$129.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$129.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$127.40 $114.66
Specific wheel spacers for Melotti Racing “fast action” wheel axle, used by the main teams competing in the SSP and WSSP championships. Specs: This new...
In stock
Add to wish list

$126.77 $116.63
Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon Bolt on products, allowing fast and easy removal and/or...
In stock
Add to wish list

$122.20 $109.98
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$121.49 $109.34
Made from high quality PMMA plexiglass, DOT626 certified The screen is 2mm thick to maintain a light weight and flexibility which also makes it...
In stock

$121.49 $109.34
Made from high quality PMMA plexiglass, DOT626 certified The screen is 2mm thick to maintain a light weight and flexibility which also makes it...
In stock

$121.49 $109.34
Made from high quality PMMA plexiglass, DOT626 certified The screen is 2mm thick to maintain a light weight and flexibility which also makes it...
In stock

$121.49 $109.34
Made from high quality PMMA plexiglass, DOT626 certified The screen is 2mm thick to maintain a light weight and flexibility which also makes it...
In stock

$119.98 $107.98
This kit relocates your license plate to the rear of your bike, below the tail light. Relocates license plate and stock turn signals Black powder coating...
In stock
Add to wish list

$118.30 $108.84
Eliminates the Air Re-circulation system Ducati V2 Panigale for better EGA readings especially during sweep style dyno tuning. The kit consists of a CNC...
In stock
Add to wish list

$115.70 $104.13
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS STREETFIGHTER 749 999 848 1098...
In stock

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$114.42 $105.27
Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon Bolt on products, allowing fast and easy removal and/or...
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$112.62 $101.36
Very stylish Billet Front Brake And Clutch Fluid Reservoir caps with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with application...
In stock

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$109.20 $98.28

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$109.20 $98.28
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS STREETFIGHTER 749 999 848 1098...
In stock

$119.95 $107.96
CRG
The CRG Arrow Bar End Mirror is the ideal application for modern, performance sportbikes and naked sportbikes. Aerodynamic styling in billet aluminum...
In stock
Add to wish list

$107.25 $96.52
Bracket billet aaluminum Used to adjust the stroke of the master cylinder without having to pit A must for track / race bikes
In stock

$105.00
Small plug in modules enabling the standard 'DES' electronic fork adjusters to be disconnected and replaced without having error messages on the dashboard....
In stock
Add to wish list

$103.30 $82.64
DNA

The DNA High performance air filter is a high quality next generation multilayer cotton gauze oil impregnated air filter.

In stock
Add to wish list

$102.70 $92.43
COMPATIBLE WITH ADJUSTABLE DUCABIKE REARSET (PR1199 01 / 02 / 03) + OEM REARSET INCLUDING THE FIXING SCREWS Made in Italy
In stock
Add to wish list

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$99.95
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$98.28 $88.45

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$97.50
Mounting bracket kit for AIM Solo- 2 GPS lap timers/data loggers. Designed for the following models: Ducati 899 959, 1199 1299, V2, V4
In stock
Add to wish list

$95.95
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$95.95
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$95.95
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$94.19 $84.77
Replacement Tubes for OEM Clip-ons Sold as a pair Holes pre-drilled for controls Billet ergal Comes with bar-ends
In stock

$91.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play Aprilia RSV4 21+...
In stock

$91.00 $81.90
I2M
CNC Dash Brackets make installing your I2M dash simple and effortless.
In stock
Add to wish list

$91.00 $81.90
7075 Billet Aluminium 2 Pcs Set (Sprocket & Wheel Side) Made in ITALY Designed for the following model bikes: SBK 1098 / 1198 / 1199 / 1299 / V4...
In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$91.00 $83.72
Jetyprime Ducati Panigale V2 Rain Light Conversion Kit Rain light conversion kit for Ducati Panigale V4. Plug and Play harness set that converts the rear...
In stock
Add to wish list

$89.70 $80.73
Aluminum laser cutting and anozied for the perfect color. Supplied all the necessary hardware Plug and play.
In stock

$88.95
Fits variety of Ohlins damper.
In stock
Add to wish list

$87.00
Replacement rear sub loom made from high specification Raychem wire and sleeve including just the diagnostic connector and rear light. Turn signal and...
In stock
Add to wish list

$80.54 $72.49

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$102.40
CRG
The Hindsight LS (Lane Split) Bar End Mirror was created by adding the folding / retractable feature to the original Hindsight. There are two primary...
In stock

$79.95 $71.95
Machined billet aluminium Designed for track / racing use Select 50mm, or 51mm clamp depending on your forks. Made in Italy
In stock

$79.95

Snake Skin kit includes left and right tank grips, frame grips and center tank protector. This product is made in our Aggressive Adhesive.

In stock
Add to wish list

$79.90
SKF
These SKF fork seals are commonly used in pro racing for their reduced friction while maintaining an OEM quality seal. Green fork seals have 20% reduced...
In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock