HSBK Categories HSBK Categories

 

Product filters Product filters

SuperSport

$0.00
DID
In developing the Pro-Street VX Series, D.I.D focused on improving chain “Rigidity”. Traditionally, “Tensile Strength” has been used to measure the strength...
In stock

$1.50
Ducati Oil Drain Plug Crush Washer Sold individually Crush washers are supplied in either copper or aluminium depending on our stock.
In stock

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list


$16.64
Widely used in the Racing sector, it has been designed to preserve the bodywork from accidental leakage of fluid, as well as to protect the fluid against UV...
In stock

$19.95
CRG

This is the Billet Internal Adapter for the Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors.

In stock
Add to wish list

$20.00 $16.00
DNA
DNA AIR FILTER SERVICE KIT (220 ML OIL & 270 ML CLEANER)
In stock
Add to wish list

$20.80 $18.72
BILLET ALLUMINIUM, ANODIZATION COLORED SURFACE COMPLETE FOR MOUNTING ELIMINATES CABLE CLUTCH CONTROL IN CASE OF INSTALLATION OF OUR HYDRAULIC CLUTCH CONTROL...
In stock

$22.53 $20.28
WORKED FROM FULL ALLOY WITH COLORED ANODIZATION HOLES FOR LOCKING IN PROCEDURAL RACING USE THROUGH WIRE IRON
In stock

$22.63 $20.37
Can be used on the front or rear master cylinder M10x1mm
In stock
Add to wish list

$22.96
Desinged for wet clutch Set of 3 Made in USA Fits these Bikes: 2016-2018 Ducati 959 Panigale 2017-2018 Ducati Hypermotard 939/939 SP 2018 Ducati...
In stock
Add to wish list

$24.70 $22.23
WORKED FROM FULL ALLOY WITH COLORED ANODIZATION HOLES FOR LOCKING IN PROCEDURAL RACING USE THROUGH WIRE IRON Designed for the following model bikes:...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$34.25 $24.99

Ducati Fuel Filter

OE Ducati Spare Part

In stock
Add to wish list

$50.00 $25.00
Machined from T6 billet aluminum. - Stronger and more attractive than Ducati OEM part Proudly made in USA Designed for the following model Ducati's:...
In stock

$28.60 $25.74
Billet oil fill cap with pre-drilled hole for safety wire Made in Italy Fits the following models: HYM 796 / 821 / 939 SF848 - 848 M696 / 796 /...
In stock

$32.00
TT H38 GF pad kit for 20.6950.xx / 20.6951.xx caliper
In stock
Add to wish list

$33.80 $31.10
STM
STM Ducati Single Clutch Plate Genuine STM part Made in Italy
In stock

$34.12 $30.71
Designed for DucaBike rearset as well as independent DucaBike brake / clutch pedals Billet aluminum and anodized to perfection Adjustable eccentric...
In stock

$34.20 $30.78
Machined from T6 billet aluminum. - Stronger and more attractive than Ducati OEM part Supplied with new oring Made in Italy Designed for the...
In stock

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$37.96 $34.16

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$39.00 $35.10
Complete with assembly instructions Interchangeable with the originals 5 or 6-piece kit External dimension increased compared to the original for...
In stock

$39.90 $31.92
HRT
HRT Ducati Titanium Rear Swingarm Pinch Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$39.98
CCW
This aluminum fuel sender nut sits at the top of the sender unit. Note: You will need to remove the pins from the electrical connector on the sender unit...
In stock
Add to wish list

$42.95 $34.36
HRT
Titanium Front Axle Nut Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when you need strong...
In stock
Add to wish list

$44.95

Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today.

In stock

$66.95 $61.96
CRG
The Blindsight Bar End Mirror is intended to be used in conjunction with a left side mounted Hindsight or stock mirrors. This little assembly will clean up...
In stock

$47.78 $43.00

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$49.14 $39.31
HRT
Titanium rear sprocket carrier nuts kit contains 5 or 6 (select from drop down menu) nuts which is made from solid CNC billet titanium and finished to a...
In stock

$49.95 $44.95
This Ducati Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock

$50.70 $45.63
Aluminum laser cutting and anozied for the perfect color. Supplied all the necessary hardware Plug and play.
In stock

$51.20 $46.08
Very stylish Billet Front Brake And Clutch Fluid Reservoir caps with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with...
In stock

$53.24
Complete kit designed for the Ducati radial clutch master cylinder . Kit includes: Tank complete with cap (45 cc) Mounting bracket Rubber hose...
In stock
Add to wish list

$54.98
CCW
Ducati All 1000 and 1100 2V engines, Hypermotard 1100, Sport Touring ST3, Monster 1100, 1000, S2R 1000, Paul Smart, Sport Classic 1000, Multistrada 1100,...
In stock
Add to wish list

$54.98
CCW
Belts for Ducati 900ss, M900, MH900e, ST2 Replaces OE 737.1001.1A, 737.4002.2A Sold individually
In stock
Add to wish list

$54.98
CCW
Belts for Ducati Monster S2R800, 800, 695, 620, 600-750 (1997-up), Sport 800, 750, 620, Supersport 800, 750, Multistrada 620 Replaces OE 737.1005.1A or...
In stock
Add to wish list

$56.88 $51.19
Designed for DucaBike rearset as well as independent DucaBike brake / clutch pedals Billet aluminum and anodized to perfection Folds in case of a crash...
In stock
Add to wish list

$81.95 $75.46
CRG
The Hindsight Bar End Mirror is best functioning, highest quality motorcycle mirror you'll find anywhere. We use custom convex glass formed to our own...
In stock

$59.95
Must be used with Superlite PCD-3 or PCD-4 billet aluminum "Quick Change" sprocket carrier Exclusive tooth profile for extended mileage output Induction...
In stock

$59.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$59.95
Must be used with Superlite PCD-3 or PCD-4 billet aluminum "Quick Change" sprocket carrier Exclusive tooth profile for extended mileage output Induction...
In stock

$61.43 $55.29
KIT READY FOR ASSEMBLY ASSEMBLY ON THE FRONT WHEEL STUD PROTECTS LEGS FORK IN CASE OF FALL Designed for the following bikes 748 - 916 - 996 - 998...
In stock

$61.43 $55.29
KIT READY FOR ASSEMBLY ASSEMBLY ON THE FRONT WHEEL STUD PROTECTS LEGS FORK IN CASE OF FALL Designed for the following bikes 848 - 1098 - 1198...
In stock

$63.70 $57.33

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$63.70 $57.33
BILLET ALUMINUM ANODIZED COLORED SURFACE KIT 2 CAPS READY TO ASSEMBLY
In stock

$64.95
Must be used with Superlite PCD-3 or PCD-4 billet aluminum "Quick Change" sprocket carrier Exclusive tooth profile for extended mileage output Induction...
In stock
Add to wish list

$64.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$65.52
Complete kit designed for the Ducati radial clutch master cylinder . Kit includes: Tank complete with cap (45 cc) Mounting bracket Rubber hose...
In stock
Add to wish list

$71.50 $64.35
KIT READY FOR ASSEMBLY ASSEMBLY ON THE FRONT WHEEL STUD PROTECTS LEGS FORK IN CASE OF FALL Designed for the following bikes 748 - 916 - 996 - 998...
In stock

$71.50 $64.35
KIT READY FOR ASSEMBLY ASSEMBLY ON THE FRONT WHEEL STUD PROTECTS LEGS FORK IN CASE OF FALL Designed for the following bikes 848 - 1098 - 1198...
In stock

$74.95
Must be used with Superlite PCD-3 or PCD-4 billet aluminum "Quick Change" Sprocket Carrier CNC Machined to exact tolerances for precise fitment Made from...
In stock

$74.95
The Superlite RS8 Series rear sprocket is the #1 light weight aluminium racing sprocket on the market today.* CNC Machined to exact tolerances for precise...
In stock

$102.40
CRG
The Hindsight LS (Lane Split) Bar End Mirror was created by adding the folding / retractable feature to the original Hindsight. There are two primary...
In stock

$88.80 $71.04
DNA

The DNA High performance air filter is a high quality next generation multilayer cotton gauze oil impregnated air filter.

In stock
Add to wish list

$88.95
Fits variety of Ohlins damper.
In stock
Add to wish list

$89.70 $80.73
Replacement Clip-ons Sold as a pair Holes need to be drilled for controls Billet ergal Adjustable to reduce stress on your wrists
In stock

$102.70 $92.43

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious designed by the owner based on own taste and requirements..

In stock

$102.70 $92.43
BILLET ALUMINUM ANODIZE SURFACE TREATMENT 15 MM OF RISE MAKES FOR A MORE COMFORTABLE RIDE KIT ARRIVES READY TO INSTALL
In stock

$107.25 $96.52
Very stylish Billet Front Brake And Clutch Fluid Reservoir caps with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with application...
In stock

$107.84 $97.06

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$119.95 $107.96
CRG
The CRG Arrow Bar End Mirror is the ideal application for modern, performance sportbikes and naked sportbikes. Aerodynamic styling in billet aluminum...
In stock
Add to wish list

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$111.93 $100.74
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS DIAVEL / MTS 950 - 1100 - 1000...
In stock