HSBK Categories HSBK Categories

 

Product filters Product filters

Kawasaki

$495.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$425.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$475.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$325.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$99.95
WRS
Windscreen made using high quality PMMA plexiglass, DOT626 approved 2 mm thick. Racing windscreen used by numerous teams in the world championships,...
In stock

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$1,248.00 $1,123.20
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock

$572.00 $514.80
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$84.95

SnakeSkin kit includes right and left tank grips, frame grips, and a center tank protector.

In stock
Add to wish list

$74.95

SnakeSkin kit includes right and left tank grips, left and right lower grips, and center tank protector. This product is made in our Aggressive Adhesive.

In stock
Add to wish list

$24.95
New 420 Conversion race sprockets are now available in a wide range of sizes for the Ninja 400 models! Superlite "Xtreme Duty" front sprockets are...
In stock

$26.95
New 415 Conversion race sprockets are now available in a wide range of sizes for the Ninja 400 models! Superlite "Xtreme Duty" front sprockets are...
In stock

$64.95
Superlite RS8-R Series alloy race sprockets are manufactured to be extremely light yet durable for big horsepower applications. If you're looking to shave...
In stock

$184.95

The Sunstar 520 RTG1 Works Tripleguard Sealed Racing Chain has exclusively been used by the HSBK Racing team since 2012.

In stock
Add to wish list

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$269.00
Staubli Socket for Bleeder Plug; material: billet aluminum, anodized. This clean-break, non spill design, coupling prevents any loss of brake fluid and...
In stock
Add to wish list

$225.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$309.00
Dry Brake Socket / quick disconnect, with 20 degree banjo fitting, billet aluminum, anodized. This banjo fitting (10mm, 3/8") quick disconnect can be...
In stock
Add to wish list

$199.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$159.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$79.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$169.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$62.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$62.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M30x1.5 Made in Italy
In stock

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$218.40 $196.56
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Will also fit the Tuono V4 Factory that...
In stock

$413.40 $372.06
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$102.70 $92.43
Machined from solid billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$338.00 $304.20
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$557.70 $501.93
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$58.50
Lightweight steering stops for your Ninja 400 track bike. Handcraft manufactured from aerospace aluminum alloy. Helps limit steering travel in the...
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$149.50 $134.55
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$276.90 $249.21
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$340.60 $306.54
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock

$257.40 $231.66
6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use Made in Italy Also...
In stock
Add to wish list

$340.60 $306.54
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$220.00 $198.00
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$269.95

Kawasaki ZX 6R 2009 > 2019 6 Piece Samco Sport Coolant Hose Kit

In stock

$336.95

Kawasaki ZX 6R 2009 > 2019 Race Hose Kit 4 Piece Samco Sport Coolant Hose Kit

In stock

$50.95

Kawasaki ZX 6R 2009 > 2019 2 Piece Oil Breather Samco Sport Hose Kit

In stock

$259.95

Kawasaki ZX-10R / SE / KRT / RR 2016 > 2019 7 Piece OEM Replacement Samco Sport Silicone Hose Kit

In stock

$273.95
Kawasaki ZX 10R 2011-2015 6 Piece OEM Replacement Samco Sport Silicone Hose Kit
In stock

$318.95
Kawasaki ZX-10R / SE / KRT / RR 2016 > 2019 4 Piece Samco Sport Y-Piece Race Design Silicone Radiator Coolant Hose Kit
In stock

$296.95
Kawasaki ZX 10R 2011-2015 4 Piece Y-Piece Race Design Samco Sport Silicone Radiator Coolant Hose Kit
In stock

$90.95

Kawasaki ZX 10R 2011-2015 2 Piece Oil Tank Samco Sport Silicone Radiator Coolant Hose Kit

In stock

$88.95

Kawasaki Ninja 400 2018 > 2019 4 Piece Samco Sport Coolant Hose Kit

In stock

$161.95

Kawasaki 300 Ninja 2013 > 2017 5 Piece Samco Sport Coolant Hose Kit

In stock

$172.95

Kawasaki 250 R Ninja 2008 > 2012 5 Piece Samco Sport Coolant Hose Kit

In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock
Add to wish list

$298.95 $275.03
Custom hand made seat designed for racing use. Covered with a 3 mm layer of high density special mousse. This is the same material chosen by most MotoGP ,...
In stock
Add to wish list

$279.95 $257.55
Custom hand made seat designed for racing use. Covered with a 3 mm layer of high density special Mousse. This is the same material chosen by most MotoGP ,...
In stock
Add to wish list

$279.95 $257.55
Custom sporty seat made from our "street neoprene" material. This is a non-slip fabric which allows for good grip as well as changing positions easily. A...
In stock
Add to wish list

$399.95 $367.95
Sporting seat suitable for a mix road-racing use. Special neoprene effect fabric material with non-slip surface. With no stitching this seat gives a very...
In stock
Add to wish list

$99.95
Z-RACING SCREEN FOR KAWASAKI NINJA 400 2021 DIMENSIONS (HEIGHT X WIDTH): 400 x 335 mm 30 mm. higher than the original Thickness: 3 mm
In stock

$99.95
Z-RACING SCREEN FOR KAWASAKI NINJA 300 DIMENSIONS (HEIGHT X WIDTH): 400 x 335 mm 30 mm. higher than the original Thickness: 3 mm
In stock

$395.00
Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view below for the tool in...
In stock
Add to wish list

$495.00
Pneumatic Preload Adjuster for Ohlins TTX shocks: V2, ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an adapter). These type of...
In stock
Add to wish list

$193.70
The concept The meticolous observation of the braking system's dynamics has given birth to our "Brake Plate Radiator", particularly with the thermal energy...
In stock
Add to wish list

$899.00
The STX36 has a 36mm piston and is available in a version with a hose remote reservoir as well as in monotube and piggyback versions, all depending on what...
In stock

$949.00 $899.00
The STX36 has a 36mm piston and is available in a version with a hose remote reservoir as well as in monotube and piggyback versions, all depending on what...
In stock

$699.00
The NIX 22 Cartridge Kit is based on the experience learned through decades of testing and racing in top-tier championships. The kit delivers unparalleled...
In stock

$89.95 $79.95
NGK
NGK Racing Series plugs are engineered to withstand the harshest engine conditions. Special insulator nose configurations improve throttle response....
In stock
Add to wish list

$22.99 $19.98
Prevents loss of coolant due to overheating Works on most water-cooled motorcycles, snowmobiles, and ATV's Designed for hot weather and/or...
In stock
Add to wish list

$164.99

The most advanced variable rate throttle in the world.

In stock
Add to wish list

$164.99

The most advanced variable rate throttle in the world.

In stock
Add to wish list

$211.90 $190.71
Melotti Racing’s Impact Absorber for Solo WSS3 dash has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined...
In stock

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$266.50 $239.85
Melotti Racing’s Impact Absorber for I2M Chrome has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined from...
In stock

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the 2D dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC machined...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$69.95
ZX6 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4 pcs Set (1 Front Plate, 1...
In stock