The Jetprime was made to give you what you want: higher performance or a lower consumption all at the right price.
The Jetprime is supplied with an easy to use software which can be easily used to set up the module.
EASY TO FIT
Even if you don’t know the difference between a slot or a Phillips head screwdriver, fitting a power module has never been this easy (complete instructions are included in the kit and can be downloaded from our website www.jetprime.it).
The Jetprime is installed using the supplied cable harness using OE style connector plugs downstream of the stock ECU and before the throttle body. This way the signals which are are sent from the stock ECU can be modified to suit your needs.
The Jetprime allows you to the change the carburetion relationship regardless to the setup installed by the manufacturer by modifying the timing intervals in which the injectors remain open during the suction phase.
Our Jetprime module will improve the performance taking into consideration factors such as air pressure and temperature of your location to ensure your bike is fuelled to an optimum (to give you an example, riding at sea level has a different effect on the bike to when it is ridden at mountain level).
A power module like the Jetprime is also crucial should you decide to add an aftermarket race exhaust or air filter to your bike as they require the best possible carburetion to guarantee an optimal performance and the Jetprime can help you achieve this.
NOTE: PLEASE READ THE INSTALLTION INSTRUCTIONS OF THE SOFTWARE BEFORE INSTALLING.
No posts found