HSBK Categories HSBK Categories

 

Product filters Product filters

Parts

$130.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$130.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$220.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$139.98
Special 120-link, racing chain. Now availible in 520, 525, or 530 pitch Comes in "Ducati Red" color Designed to guarantee top efficiency and...
In stock

$51.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$650.00

Comes ready to install "Plug, Reset TPS, & Play"

In stock

$650.00
Comes ready to install "Plug, Reset TPS, & Play"
In stock

$84.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$650.00
Comes ready to install "Plug, Reset TPS, & Play"
In stock

$650.00
Comes ready to install "Plug, Reset TPS, & Play"
In stock

$33.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$466.70
Reconfigure your bike's ECU by yourself, safely and easily. The T800 UpMap device connect to the bike via the diagnostic cable allowing you to experience...
In stock

$249.00
Sold as a pair Ducati decals not included Matte Finish Made in Italy Note: Installed...
In stock

$349.00
ucati V2 Panigale Carbon Fiber Racing Rear Fender Hugger Produced in an autoclave in 100% carbon fiber, plain weave, matte surface finish
In stock
Add to wish list

$1.50
Ducati Oil Drain Plug Crush Washer Sold individually Crush washers are supplied in either copper or aluminium depending on our stock.
In stock

$2,963.25
Straight from the racetrack and now available in a street version. The lightest aluminum alloy wheel for street use. It leverages all of the extreme...
In stock

$2,963.25
The Dymag UP7X wheels are among the lightest forged aluminum wheels on the on the planet! And just as important these are a proven rugged wheel often...
In stock

$38.95 $34.99

Europe's first and only ECE R90 approved pad. EBC Double-H pads are the grippiest street legal brake pads you can buy.

In stock
Add to wish list

$599.98

Rearsets for Aprilia RSV4, Pre-assembled, Hard Mag andodized, 150mm shift rod & LH heim joint included

In stock

$136.49
Evotech Performance radiator, oil and engine guards fit using the existing mountings points and requires no modification. These radiator, oil and engine...
In stock
Add to wish list

$99.98
Evotech Performance have designed and manufactured a tail tidy for your Dorsoduro 750 and 900. No modifications to your bike are required. Secured in...
In stock
Add to wish list

$49.98
Evotech Performance have developed an innovative spindle bobbin system which allows the bobbin head to rotate on impact. This is down to the aluminium...
In stock
Add to wish list

$49.98
Evotech Performance have developed a unique spindle bobbin system which allows the bobbin head to rotate on impact. This is down to the innovative...
In stock
Add to wish list

$29.98
Evotech Performance’s paddock stand bobbins are a must have motorcycle maintenance accessory. Manufactured in the U.K. CNC Machined from a high...
In stock
Add to wish list

$249.95
Evotech's team of savvy engineers designed these crash bobbins to fit to your Aprilia by way of the bike's original mounting points. We love your Aprilia...
In stock
Add to wish list

$99.95
Features of EP Radiator Guard for the Aprilia RS660 All aluminum light-weight construction engineered for easy, precise fit Hexagonal matrix hole-pattern...
In stock
Add to wish list

$49.95
Key Features of EP Front Spindle Bobbins Crash Protection for the Aprilia RS660 Aluminium spacer covered by nylon bobbin head Stainless Steel spindle rod...
In stock
Add to wish list

$39.95
Evotech Performance footrest blanking plates are CNC from aircraft grade aluminium. Remove the original pegs and install our plates to full the void and...
In stock
Add to wish list

$49.95
Features of EP Rear Spindle Bobbins for the Aprilia RS660 Spindle Bobbin fixed on the driveline side Protects the costly swing arm and sprocket carriers...
In stock
Add to wish list

$219.95
Super sleek and super strong design which fully integrates with the sporting lines of your Aprilia RS660. CNC machined from lightweight aircraft grade...
In stock
Add to wish list

$159.95
Features of EP EP Radiator Guard Set for Aprilia RSV4 Factory Light-weight, all-aluminium construction fabricated for precise fit and easy installation A...
In stock
Add to wish list

$219.95
Evotech Performance have designed and manufactured a tail tidy that fully integrates with the sporting lines of your RSV4 Factory, using the Aprilia's...
In stock
Add to wish list

$249.95
Evotech's team of savvy engineers designed these crash bobbins to fit to your Aprilia by way of the bike's original mounting points. We love your Aprilia...
In stock
Add to wish list

$319.98
Evotech Performance have designed and manufactured a unique crash protection for the Ducati Diavel. Machined from one piece aircraft grade billet...
In stock
Add to wish list

$159.61
Ducati Panigale V4 2017 > 2019 8 Piece Samco Sport Coolant Hose Kit
In stock
Add to wish list

$268.76
Evotech Performance have designed and manufactured a tail tidy for your Streetfighter V4. No modifications to your bike are required. Secured in place...
In stock
Add to wish list

$233.32
Evotech Performance crash protection bobbins are incredibly easy to fit. Simply attach to your bike’s existing mounting points. Our crash bobbin heads...
In stock
Add to wish list

$312.48
Evotech Performance have designed and manufactured a unique main frame crash protection for the Ducati Panigale V4 range of bikes. We have designed the...
In stock
Add to wish list

$1,006.07
New Epotex fairings for Ducati Panigale V2. Epotex hulls, while representing our entry level range, have always been considered excellent in terms of value...
In stock
Add to wish list

$1,155.70
Brand new wings in Carbon Fiber for Ducati V4/S/R 2022/2023. The wings are made using pre-impregnated carbon, with a 200 gr twill weave. and processed in...
In stock
Add to wish list

$179.95
Epotex racing fairings kit for the new motorbike of Borgo Panigale. As always Epotex represents our “entry level” and is different from any other...
In stock
Add to wish list

$274.30
Tank guards for the new Borgo Panigale Superbike: Ducati Panigale V4/S/R 2022/2023 Thanks to our experience gained in MotoGP, the tank guards are made...
In stock
Add to wish list

$2,922.40
Black Carbon race fairings: front upper, side panels, lower fairing, seat, seat lower plate, airbox cover Mounting points are indicated on parts....
In stock
Add to wish list

$4,803.50
Twill Carbon race fairings: front upper, side panels, lower fairing, seat, seat lower plate, airbox cover Mounting points are indicated on parts....
In stock
Add to wish list

$349.95
Natural fiber of volcanic lava has some unique features of its kind, vacuum processed in pressure tank and the possibilty to create a 50% lighter components...
In stock
Add to wish list

$199.95
Technical aspects of EPOTEX Fairings / Bodywork: 30% lighter than standard fiberglass fairings and parts Laminated with Epoxy resin (developed to our...
In stock
Add to wish list

$2,000.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock
Add to wish list

$929.95
Same as used in World SSTK & MotoAmerica. This is must for race / track bikes not running fans. Comes complete with silicone hoses,...
In stock
Add to wish list

$489.95
Designed for race / track use
In stock
Add to wish list

$84.50
Hand made in Italy Perfect hanger for Akrapovic and other exhaust systems Used by many race teams for lightness and durability
In stock

$2,431.00
These radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock
Add to wish list

$2,431.00
These radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock
Add to wish list

$2,700.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock

$2,700.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock

$750.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock

$50.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Easy open lid ideal...
In stock
Add to wish list

$45.00
Master cylinder clutch reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket clutch master cylinder kits 15 cm bottle Made...
In stock
Add to wish list

$489.95
Designed for race / track use
In stock
Add to wish list

$1,200.00
Febur parts are designed with collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta Parkin...
In stock

$650.00
Overside oil cooler for your Ducati CF center v-cowl included
In stock
Add to wish list

$489.95
Weight: 1220 gr MonoPosto (single seat) Version Designed for race / track use
In stock
Add to wish list

$1,200.00
Febur parts are designed with collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta Parkin...
In stock

$1,200.00
Febur parts are designed with collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta Parkin...
In stock

$3,500.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$1,268.80
INCREASED STREET RACING WATER RADIATOR DUCATI 899 1199 1299 PANIGALE Radiators are produced with the help of the best world teams: Team Barni, Suzuki...
In stock
Add to wish list

$4,700.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$1,300.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock
Add to wish list

$1,500.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock

$219.95
Thermostat bypass for the V2 Panigale For optimap performance use with Samco hose kit / clamps Made in Italy
In stock

$390.00
Developed with the Aruba & Warhorse HSBK Racing Ducati Team for the NextGen Panigale V2. Made of Aviofiber To be used with Febur FE1598 radiator. Fits...
In stock
Add to wish list

$5,655.00
Febur's radiators lower temperatures thanks to the increased surface and quality of the materials. After careful studies and design we are able to achieve...
In stock
Add to wish list

$3,799.95
One of the greatest problems on this Ducati's superbike, inside and outside tracks, is with the temperature; to resolve it we designed and produced this...
In stock

$185.00
Complete kit to protect the fuel tank and under seat Applicator included Made in Italy
In stock
Add to wish list

$3,770.00
One of the greatest problems on this Ducati's superbike, inside and outside tracks, is with the temperature; to resolve it we designed and produced this...
In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$550.00
Designed for race / track use Desinged for HRC Tail Section Battery box included
In stock
Add to wish list

$2,860.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$2,574.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock
Add to wish list

$806.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock
Add to wish list

$2,782.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$780.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock
Add to wish list

$489.95
Designed for race / track use
In stock
Add to wish list

$700.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock

$95.00
A must for all race / track bikes Full set for front + rear Weight saving over OEM spacers OEM weight: 295g Febur weight: 105g...
In stock
Add to wish list

$699.95
Febur has created this auxiliary radiator kit approved for stock races in the WSS300 class. Febur radiators are manufactured with the collaboration of the...
In stock

$489.95
Designed for race / track use
In stock
Add to wish list

$3,400.00
Capacity: 24 liters Weight: about 3500 grams Complete with ergal screw cap Carbon Fiber front tank cover sold seperately
In stock

$3,400.00
Capacity: 22 liters Weight: about 3500 grams Complete with ergal screw cap Carbon Fiber front tank cover sold seperately
In stock
Add to wish list

$1,274.00
Carbon Fiber load bearing rear subframe / tail section Eliminates rear subframe Weight: 1500 grams The carbon fiber of this object was treated in an...
In stock
Add to wish list

$4,800.00
The lightening and the evolution of the structure guarantee better maneuverability and sensitivity on the rear. Original wheel or with 25mm pin. Complete...
In stock

$2,200.00
These radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$2,200.00
Febur radiators are produced with the help of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin Go, MV...
In stock

$700.00
Febur radiators are produced with the help of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin Go, MV...
In stock

$2,000.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$858.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock

$750.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock
Add to wish list

$550.00
Weight:1100 gram Designed for race / track use
In stock
Add to wish list

$2,954.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock

$2,600.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$2,400.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$2,500.00
Febur radiators are produced with the collaboration of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin...
In stock
Add to wish list

$2,000.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$650.00
Febur has created this auxiliary radiator kit approved for stock races for the 600 and 1000 races Febur radiators are manufactured with the collaboration...
In stock

$800.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock
Add to wish list

$5,100.00
The lightening and the evolution of the structure guarantee better maneuverability and sensitivity on the rear. Complete with chain tension sliders,...
In stock

$2,200.00
These radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$2,500.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$55.00
Anodized Black
In stock
Add to wish list

$20.00
Weight: 20 gram
In stock
Add to wish list

$10.00
8 Piece Set N.5 M8x25mm N.3 M8x20mm
In stock
Add to wish list

$80.00
Light weight exhuast hanger for the track / race bikes
In stock

$185.00
This unit is lighter replacement for OEM steel fairing bracket. Made from top quality aerospace aluminium alloy with a black powder coat finish....
In stock
Add to wish list

$75.00
Low friction wheel bearings for race / track bikes Full set for front + rear Set consists of 4 bearings and 4 dust seals
In stock
Add to wish list

$715.00
Febur radiators are produced with the help of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin Go, MV...
In stock
Add to wish list

$55.00
A must for all race / track bikes Comes with shown hardware
In stock
Add to wish list

$234.00
Complete with bracket For track / race bikes only NOTES: Silicone hoses and clamps not included
In stock
Add to wish list

$320.00
Developed with Yamaha Ten Kate WorldSSP Team and Yamaha GMT94 WorldSSP Team. Made of Avio Fiber To be used with Febur #FE1489S / #FE1579S radiators....
In stock
Add to wish list

$2,444.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$858.00
Febur has created this additional radiator kit approved for stock races for the 600 and the 1000 most common on the road and on the competition fields....
In stock
Add to wish list

$2,000.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$83.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) From the demands of the Isle of Man TT to the circuits of the World...
In stock
Add to wish list

$89.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) A full metal compound using the patented Array Cooling technology. As...
In stock
Add to wish list

$900.00
Aprilia RSV4 Triple Clamps Clamps come with three inserts for the top clamp and three more for the lower clamp. Stem, bottom and top clamp are made from...
In stock

$399.95
Rear linear suspension link for the RSV4 that has been designed to improve rear wheel mechanical grip. This link keeps the suspension’s rising rate more...
In stock

$199.95
BMW 310 R GS Lowering Kit This product will give you the ability to lower your motorcycle by 25 or 40 millimeters depending on the option that you chose,...
In stock
Add to wish list

$900.00
BMW S1000RR Triple Clamps 09-18 With our triple clamps, you get three inserts for the top clamp and three more for the lower clamp. The dimensions of our...
In stock