HSBK Categories HSBK Categories

 

Product filters Product filters

Yamaha

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$257.40 $236.81

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock

$387.40 $356.41

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$395.00
Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view below for the tool in...
In stock
Add to wish list

$495.00
Pneumatic Preload Adjuster for Ohlins TTX shocks: V2, ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an adapter). These type of...
In stock
Add to wish list

$69.95
R1 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4pcs Set (1 Front Plate, 2...
In stock

$69.95
R7 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4pcs Set (1 Front Plate, 2...
In stock

$69.95
R6 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4pcs Set (1 Front Plate, 2...
In stock

$69.95
R6 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 6pcs Set (3 Front Plate, 2...
In stock

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M14X1.5X12 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M12X1.25X15 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$452.40 $416.21
Quick throttle unit for Yamaha YZF-R1 Digital throttle control entirely machined from solid blank. It gives riders the feeling of a traditional throttle...
In stock

$699.00
The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3,...
In stock
Add to wish list

$1,229.00
Whether heading for a National Roadracing title or just taking your bike to the local race track, the cartridge kit offers loads of performance, stability...
In stock
Add to wish list

$2,349.00
The new racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto2 and World Superbike championships developed by our engineers...
In stock
Add to wish list

$1,199.00
The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3,...
In stock
Add to wish list

$65.00
AIM
AiM Yamaha R1 (15+) R6 (17+) Solo 2 / DL GPS Harness Kit
In stock
Add to wish list

$45.00
AIM
This kit comes with everything you need to mount your AiM Solo / Solo 2 / Solo DL / Solo DL 2 to your triple clamp on your Yamaha R1/R6
In stock
Add to wish list

$73.60 $67.71
Safe and Secure - The solid chain guard is designed with safety in mind, protecting the rider(s) from the motorcycle's drive system. Budget Friendly...
In stock
Add to wish list

$71.69 $65.95
Secondary Engine Cover: Water Pump STOCK Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon Bolt on product...
In stock
Add to wish list

$1,241.50 $1,142.18
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock
Add to wish list

$54.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$320.00
Developed with Yamaha Ten Kate WorldSSP Team and Yamaha GMT94 WorldSSP Team. Made of Avio Fiber To be used with Febur #FE1489S / #FE1579S radiators....
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$572.00 $514.80
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock
Add to wish list

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$63.70 $57.33
Sprocket cover combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact, they’re designed to...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$31.20 $28.08
Single Cover Made in Italy
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Rear Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$5.95 $4.76
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$156.00
Mutant race bodywork bracket kit Desinged to work with BikesPlast 17+ R6 bodywork
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$417.30 $375.57
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$243.10 $218.79
This racing kit allows you to install the steering damper in a lateral position on your Yamaha R6. Developed to be used in World Supersport 600 class and...
In stock

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$249.95
Quality European made carbon for the Yamaha R1 2020+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$269.95
Quality European made carbon for the Yamaha R1 2020+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$999.95
Premium Yamaha R7 race / track fairing set. Very lightweight, strong and with a superb fit and finish. The evolution of materials in recent years...
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M27x3 Made in Italy
In stock

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$20.80 $18.72
Machined from solid billet aluminum Perfect anodized finish Sold individually Made in Itay
In stock
Add to wish list

$20.80 $18.72
Machined from solid billet aluminum Perfect anodized finish Sold individually Made in Itay
In stock
Add to wish list

$388.70 $349.83
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber for Solo WSSp dash has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined...
In stock
Add to wish list

$257.40 $231.66
6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use Made in Italy Also...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$355.00 $319.50
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$351.00 $315.90
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$234.00 $210.60
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$260.00 $234.00
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$999.95
Premium Yamaha R6 race / track fairing set. Very lightweight, strong and with a superb fit and finish. The evolution of materials in recent years...
In stock

$999.95
Premium Yamaha R1 race / track fairing set. Very lightweight, strong and with a superb fit and finish. The evolution of materials in recent years has...
In stock

$44.95
Gandini front sprocket are made of 18NICRMO5 steel, hardened and heat treated with an isotropic finish. The production is controlled by CNC machinery and...
In stock

$79.95
The sprockets are made from solid, from forged extruded bar, in special hard anodized aluminum 7075-T6 alloy. Designed and built to lighten the...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$517.40 $465.66
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$136.50 $125.58
MUST BE USED WITH YEC ECU Constructed in special plastic material by turning and milling. Made in Italy
In stock
Add to wish list

$45.50 $40.95
These are designed for the Spider EVO rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually Made in Italy
In stock

$89.95 $79.95
NGK
NGK Racing Series plugs are engineered to withstand the harshest engine conditions. Special insulator nose configurations improve throttle response....
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$888.50 $710.80
DNA

A DNA High Performance Filter is a high quality, next generation multilayer cotton gauze, oil impregnated air filter.

In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$742.50
What does it do and what is Blip Box? This miniature module provides an fully programmable throttle 'auto blip' when ever a down-shift registered via...
In stock

$742.50
What does it do and what is Blip Box? This miniature module provides an fully programmable throttle 'auto blip' when ever a down-shift registered via...
In stock

$499.00
Electronic RBW throttle control for Yamaha R1 2020+i. Designed for racing use Quicker reponse - less rotation that stock! Works with OEM or Race ECU...
In stock

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$165.10 $148.59
Set of front and rear wheel axle sliders for R3/R25, with retaining system on pins and nuts. They have been developped for special use on races (WSSP300 and...
In stock
Add to wish list

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$84.95

Precut kit includes left and right tank grips, frame grips and center tank protector. This product is made in our Aggressive Adhesive.

In stock
Add to wish list

$64.95

Precut kit includes left and right tank grips and center tank protector. PLEASE WATCH APPLICATION VIDEO!!! This product is made in our Aggressive Adhesive.

In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$1,780.95 $1,638.47

Please allow 7-10 days for delivery.

In stock
Add to wish list

$2,494.95 $2,295.35
The flagship of the Akrapovič exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance...
In stock
Add to wish list

$2,508.00 $2,307.36
This is a top-of-the-range full system beautifully crafted from high-grade ultra-lightweight titanium. It is the lightest Akrapovič complete exhaust system,...
In stock
Add to wish list

$2,228.95 $2,050.63

Please allow 7-10 days for delivery.

In stock
Add to wish list

$257.40 $231.66
Specially designed for the 2015 & Up Yamaha R1 Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use...
In stock
Add to wish list

$49.40 $44.46
Sold as a set Made in Italy
In stock
Add to wish list

$49.40 $44.46
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock
Add to wish list

$78.00 $70.20
It Is essential to limit the steering angle of race motorbikes, with this racing component is not necessary any more the use of the classic balancing...
In stock
Add to wish list

$276.90 $249.21
This performance kit, developed especially for Yamaha R1, take the braking system to an upper level. The advantages of our RBS (Racing brake System)...
In stock

$99.95
Zero Gravity Double Bubble Windscreen The Zero Gravity Double Bubble Windscreen is the most popular windscreen with in the Zero Gravity family. Its...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$295.95 $266.35
3D
All of our 3D chains are 120 link and come with a master link. FIVE CONCEPTS TO MAKE OUR IDEAL THREED CHAIN A REALITY Impressive Ultimate Plate Shape...
In stock

$317.95 $286.15
3D
Our Exclusive SX2 Ring leads to 30% reduction of friction (compared with our existing products). Chromium Carbide pin surface coating increases hardness...
In stock

$64.99
*FOR RACING USE ONLY** FOR USA MODELS ONLY** Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$257.40 $231.66
Specially designed for the 2017 & Up Yamaha R6 6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed...
In stock
Add to wish list

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$75.40 $67.86
Protects the Ohlins pre-load adjuster in case of a crash Machined from solid Delrin Stainless steel Murray clamp included Racing / track use only Made...
In stock
Add to wish list

$48.10 $43.29
Protects the brake reservoirr in case of a carsh Machined from solid in Delrin The kit includes screw and expansion threaded bushing for assembly Racing...
In stock
Add to wish list