HSBK Categories HSBK Categories

 

Product filters Product filters

YZF R1

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$395.00
Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view below for the tool in...
In stock
Add to wish list

$495.00
Pneumatic Preload Adjuster for Ohlins TTX shocks: V2, ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an adapter). These type of...
In stock
Add to wish list

$69.95
R1 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4pcs Set (1 Front Plate, 2...
In stock

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M14X1.5X12 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$452.40 $416.21
Quick throttle unit for Yamaha YZF-R1 Digital throttle control entirely machined from solid blank. It gives riders the feeling of a traditional throttle...
In stock

$65.00
AIM
AiM Yamaha R1 (15+) R6 (17+) Solo 2 / DL GPS Harness Kit
In stock
Add to wish list

$45.00
AIM
This kit comes with everything you need to mount your AiM Solo / Solo 2 / Solo DL / Solo DL 2 to your triple clamp on your Yamaha R1/R6
In stock
Add to wish list

$54.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock
Add to wish list

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$6.95 $5.56
HRT
Titanium Rear Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$5.95 $4.76
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$417.30 $375.57
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$249.95
Quality European made carbon for the Yamaha R1 2020+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$269.95
Quality European made carbon for the Yamaha R1 2020+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M27x3 Made in Italy
In stock

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$351.00 $315.90
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$999.95
Premium Yamaha R1 race / track fairing set. Very lightweight, strong and with a superb fit and finish. The evolution of materials in recent years has...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$136.50 $125.58
MUST BE USED WITH YEC ECU Constructed in special plastic material by turning and milling. Made in Italy
In stock
Add to wish list

$89.95 $79.95
NGK
NGK Racing Series plugs are engineered to withstand the harshest engine conditions. Special insulator nose configurations improve throttle response....
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$742.50
What does it do and what is Blip Box? This miniature module provides an fully programmable throttle 'auto blip' when ever a down-shift registered via...
In stock

$499.00
Electronic RBW throttle control for Yamaha R1 2020+i. Designed for racing use Quicker reponse - less rotation that stock! Works with OEM or Race ECU...
In stock

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$2,508.00 $2,307.36
This is a top-of-the-range full system beautifully crafted from high-grade ultra-lightweight titanium. It is the lightest Akrapovič complete exhaust system,...
In stock
Add to wish list

$2,228.95 $2,050.63

Please allow 7-10 days for delivery.

In stock
Add to wish list

$257.40 $231.66
Specially designed for the 2015 & Up Yamaha R1 Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use...
In stock
Add to wish list