HSBK Categories HSBK Categories

 

Product filters Product filters

YZF R6

$530.00 $477.00
This new state-of-the-art Throttle Blipper system or Down Shifter is designed to compliment Translogic's Intellishift DCS, QSX Quckshifter systems and...
In stock
Add to wish list

$63.70 $57.33
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$139.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) Z04 dedicated racing compound Pads are 8.5mm thick Fit the following...
In stock
Add to wish list

$425.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$199.95
Quality European made carbon fiber for the Yamaha R6 17+ & R1 15+
In stock
Add to wish list

$249.95
Quality European made carbon fiber for the Yamaha R6 2017+ Sold as a set Double side tape is used to attach to swingarm (not included) Made in Italy
In stock
Add to wish list

$49.95 $44.95
This Yamaha Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock
Add to wish list

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$254.80 $229.32
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Remote Adjuster sold seperately Made in...
In stock

$1,241.50 $1,142.18
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$517.40 $465.66
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$240.72 $221.46
Alternator / Generator STOCK Cover, Clutch / Gearbox Cover, Pulse / Timing Cover. Revolutionary new tough, high-impact composite material made from 60%...
In stock
Add to wish list

$275.00
The Öhlins Front Fork Piston Kit (FPK) is available for most 2007 and newer applications. Each kit contains two complete sets of pre-assembled compression...
In stock
Add to wish list

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$1,129.00
The TTX RT has a competitive price but still offers great performance for the road and track day enthusiast. The shock is based on the TTX36 with it’s race...
In stock

$83.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) From the demands of the Isle of Man TT to the circuits of the World...
In stock
Add to wish list

$425.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$289.90 $266.71

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$2,000.00
Febur radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$99.95
Zero Gravity Double Bubble Windscreen The Zero Gravity Double Bubble Windscreen is the most popular windscreen with in the Zero Gravity family. Its...
In stock

$345.00 $310.50
This new state-of-the-art Throttle Blipper system or Down Shifter is designed to compliment Translogic's Intellishift DCS, QSX Quckshifter systems and...
In stock
Add to wish list

$95.95
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$1,229.00
Whether heading for a National Roadracing title or just taking your bike to the local race track, the cartridge kit offers loads of performance, stability...
In stock

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$79.95
The sprockets are made from solid, from forged extruded bar, in special hard anodized aluminum 7075-T6 alloy. Designed and built to lighten the...
In stock

$93.25 $85.79
Revolutionary new tough, high-impact composite material made from 60% fiber glass nylon Bolt on products, allowing fast and easy removal and/or...
In stock
Add to wish list

$36.40 $32.76
Reduces the steering angle Racing / track use only Made in Italy
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$57.20 $51.48
The “Corsa” wheel axle protection are born on the race fields to simplify the change of wheels in the box and they are now available for your supersports...
In stock
Add to wish list

$89.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) A full metal compound using the patented Array Cooling technology. As...
In stock
Add to wish list

$2,494.95 $2,295.35
The flagship of the Akrapovič exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance...
In stock
Add to wish list

$517.40 $465.66
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$134.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$49.40 $44.46
Sold as a set Made in Italy
In stock
Add to wish list

$5.95 $4.76
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$1,780.95 $1,638.47

Please allow 7-10 days for delivery.

In stock
Add to wish list

$49.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$900.00
Yamaha R6 Triple Clamps 2017+ The stock offset of the Yamaha R6 is set at 30mm. With these triple clamps, you get three inserts for the top clamp and three...
In stock
Add to wish list

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$63.70 $57.33
The “Corsa” wheel axle protection are born on the race fields to simplify the change of wheels in the box and they are now available for your supersports...
In stock
Add to wish list

$257.40 $231.66
Specially designed for the 2017 & Up Yamaha R6 6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed...
In stock
Add to wish list

$403.00 $362.70
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$64.99
*FOR RACING USE ONLY** FOR USA MODELS ONLY** Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber for Solo WSSp dash has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined...
In stock
Add to wish list

$742.50
What does it do and what is Blip Box? This miniature module provides an fully programmable throttle 'auto blip' when ever a down-shift registered via...
In stock

$115.83
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable....
In stock

$999.95
Premium Yamaha R6 race / track fairing set. Very lightweight, strong and with a superb fit and finish. The evolution of materials in recent years...
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M27x3 Made in Italy
In stock

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$159.98
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower...
In stock

$243.10 $218.79
This racing kit allows you to install the steering damper in a lateral position on your Yamaha R6. Developed to be used in World Supersport 600 class and...
In stock

$6.95 $5.56
HRT
Titanium Rear Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips and center tank protector. This product is made in our Aggressive Adhesive.

In stock
Add to wish list

$44.95
Gandini front sprocket are made of 18NICRMO5 steel, hardened and heat treated with an isotropic finish. The production is controlled by CNC machinery and...
In stock

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$49.40 $44.46
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock
Add to wish list