HSBK Categories HSBK Categories

 

Product filters Product filters

Brake / Clutch / Controls

$19.50
ABS Pump sealing plug with o-ring Set of 4 Fits bikes with M10x1.0 Banjo Fittings Note: Offroad / Race use only
In stock
Add to wish list

$249.95
Racing throttle is 65° Rubber grip not included Can be used with stock wiring harness, but ride by wire calibration is required. Cruise control will be...
In stock
Add to wish list

$328.95
OEM Aprilia RH Grip with Throttle/Demand Sensor - 2D000095 Fits the following: '17-'19 RSV4 (all variants) '19 RSV4 1100 Factory '17-'19...
In stock
Add to wish list

$199.95
Designed to relocate the rear caliper to the bottom with option to make captive for faster / easier tire changes. Machined from solid billet...
In stock

$249.95
Unique in design and appearance, the AXIS rear floaters will be a limited premium line intended for late model European and select Japanese Sportbikes (for...
In stock
Add to wish list

$279.95
Unique in design and appearance, the AXIS rear floaters will be a limited premium line intended for late model European and select Japanese Sportbikes (for...
In stock
Add to wish list

$1,499.00
This new Brembo “.484” caliper is made entirely from billet, starting with a block of aluminum machined with the most modern CNC technologies available. The...
In stock
Add to wish list

$675.00
Designed for the urban, custom cafe, and bike night market. These beautifully designed rotors, with their carrier machined entirely from billet aluminum is...
In stock
Add to wish list

$575.00
Developed with the precise goal of offering all owners of the most popular European and Japanese hypersports models maximum performance both on the road and...
In stock
Add to wish list

$699.00
Using technology developed in Moto GP this revolution in brake rotor technology takes performance to a new level. The patented T drive system allows the...
In stock
Add to wish list

$525.00
Package Master / Clutch Lever set for your Aprilia RSV4 or Tuono V4. The most significant achievement is, that the 19RCS CORSA CORTA allows the rider to...
In stock
Add to wish list

$150.00
Mechanical clutch lever for OEM clutch perch
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$62.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Made in Italy
In stock
Add to wish list

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$1,549.00
The two piece caliper range are produced from CNC machined billet aluminum. Nickel coating caliper body; 4x32mm piston diameter; Complete with Z03 brake...
In stock
Add to wish list

$1,399.00
Brembo Caliper Set P4 30/34mm GP4-RB 2-Pin Billet 2-Piece 100mm Radial Mount Hard-Anodized Black
In stock
Add to wish list

$799.00
Cast aluminum 1 piece calipers with 4x30mm pistons Natural paint finish Fits most European sport bikes (100mm fixing) Kit comprises 2 calipers complete...
In stock
Add to wish list

$290.00
Piston size: 16 mm Distance center to center: 18 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4
In stock

$290.00
Piston size: 19 mm Distance center to center: 18 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4
In stock
Add to wish list

$290.00
Piston size: 19 mm Distance center to center: 20 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4 Non Folding Lever
In stock
Add to wish list

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$375.00
The most significant achievement is, that the 19RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$295.00
The RCS 14mm has been designed for the rider who requires more brake performance and variation in brake lever feel when compared to a stock master cylinder....
In stock

$185.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound
In stock
Add to wish list

$219.90 $197.92
CRG
The RC2 is a brand new version of the on-the-fly position adjustable lever, designed for OEM style master cylinders. A worthy successor to the highly...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest MotoGP teams Dual-compound design with firm inner and softer outer compound for...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$15.95 $12.76
HRT
Titanium Front Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$10.95 $8.76
HRT
Titanium Rear Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$351.00 $315.90
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$452.40 $416.21
Electronic RBW throttle control for Aprilia RS 660. Designed for racing use Quicker reponse - less rotation that stock! Works with OEM or Race ECU To...
In stock
Add to wish list

$330.20 $303.78

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$487.50 $438.75
Developed with the proven geometry of our “for race only” top fork bridge for Aprilia RSV4. Extremely flexible to transmit the best feeling to the rider...
In stock
Add to wish list

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$146.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$257.40 $231.66
Spider Racing Clip On Handlebars are 100% CNC machined from high grade 7075 alloy solid billet providing maximum strength, the highest quality, with a...
In stock
Add to wish list

$600.00 $540.00
Aprilia RS 660 Street Bodywork Billet Top Clamp / Clip-On set Designed to fit street or race bodywork 6.5 degree 42mm offset Machined from solid billet...
In stock
Add to wish list

$351.00 $315.90
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$279.50 $251.55
6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use Made in Italy Also...
In stock
Add to wish list

$1,027.00 $924.30
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock
Add to wish list

$127.40 $114.66
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$78.00 $70.20
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Sold in pairs Made in Itay
In stock
Add to wish list

$24.70 $22.23
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$45.50 $40.95
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$110.00 $99.00
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$110.00 $99.00
These are designed for the Spider Aprilia 660 / Tuono 660 rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually...
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list