HSBK Categories HSBK Categories

 

Product filters Product filters

Brake / Clutch / Controls

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.95 $8.76
HRT
Titanium Rear Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$15.95 $12.76
HRT
Titanium Front Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$16.64
Widely used in the Racing sector, it has been designed to preserve the bodywork from accidental leakage of fluid, as well as to protect the fluid against UV...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$19.50
ABS Pump sealing plug with o-ring Set of 4 Fits bikes with M10x1.0 Banjo Fittings Note: Offroad / Race use only
In stock
Add to wish list

$19.95
CRG

This is the Billet Internal Adapter for the Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors.

In stock
Add to wish list

$22.63 $20.37
Can be used on the front or rear master cylinder M10x1mm
In stock
Add to wish list

$22.96
Desinged for wet clutch Set of 3 Made in USA Fits these Bikes: 2012-2014 Ducati 1199 Panigale/S 2011-2016 Ducati Diavel 2013 Ducati M1100...
In stock
Add to wish list

$22.96
Desinged for wet clutch Set of 3 Made in USA Fits these Bikes: 2016-2018 Ducati 959 Panigale 2017-2018 Ducati Hypermotard 939/939 SP 2018 Ducati...
In stock
Add to wish list

$23.80 $19.04
HRT
Titanium 5mm Caliper Spacers Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when you need...
In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest MotoGP teams Dual-compound design with firm inner and softer outer compound for...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$32.00
TT H38 GF pad kit for 20.6950.xx / 20.6951.xx caliper
In stock
Add to wish list

$34.12 $30.71
Designed for DucaBike rearset as well as independent DucaBike brake / clutch pedals Billet aluminum and anodized to perfection Adjustable eccentric...
In stock

$34.13 $30.72

DUCABIKE is synonym of passion for motorbike and in special way for Ducati® bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$36.40 $32.76
Sold in Pairs All tubes with inside diameter from 14mm to 17 mm Kit ready to assembly Made in Italy
In stock

$36.40 $32.76
Sold in Pairs All tubes with inside diameter from 14mm to 17 mm Kit ready to assembly Made in Italy
In stock

$37.70 $33.93
Specific synthetic fiber and embroidered logo. Protect the grips during the winter and when the bike has to be handles by the mechanic Sold as a pair
In stock
Add to wish list

$37.96 $34.16

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$45.00
Master cylinder clutch reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket clutch master cylinder kits 15 cm bottle Made...
In stock
Add to wish list

$46.80 $42.12
Sold in Pairs All tubes with inside diameter from 14mm to 17 mm Kit ready to assembly Made in Italy
In stock

$50.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Easy open lid ideal...
In stock
Add to wish list

$50.51 $45.46

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$51.20 $46.08
Very stylish Billet Front Brake And Clutch Fluid Reservoir caps with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with...
In stock

$52.00
Master cylinder clutch reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket clutch master cylinder kits 15 cm bottle Made...
In stock
Add to wish list

$53.24
Complete kit designed for the Ducati radial clutch master cylinder . Kit includes: Tank complete with cap (45 cc) Mounting bracket Rubber hose...
In stock
Add to wish list

$53.63 $48.27

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$56.88 $51.19
Designed for DucaBike rearset as well as independent DucaBike brake / clutch pedals Billet aluminum and anodized to perfection Folds in case of a crash...
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$61.43 $55.29
Sold in Pairs All tubes with inside diameter from 13mm to 18 mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$61.43 $55.29
Sold in Pairs All tubes with inside diameter from 13mm to 18 mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$62.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Made in Italy
In stock
Add to wish list

$62.40 $56.16

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$72.40 $65.16

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$62.40 $57.41
Constructed in special plastic material by turning and milling. Replaces OEM throttle tube Made in Italy
In stock
Add to wish list

$63.70 $57.33
Sold in Pairs All tubes with inside diameter from 13mm to 18 mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$65.52
Complete kit designed for the Ducati radial clutch master cylinder . Kit includes: Tank complete with cap (45 cc) Mounting bracket Rubber hose...
In stock
Add to wish list

$69.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$69.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$79.95 $71.95
Machined billet aluminium Designed for track / racing use Select 50mm, or 51mm clamp depending on your forks. Made in Italy
In stock

$91.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$94.19 $84.77
Replacement Tubes for OEM Clip-ons Sold as a pair Holes pre-drilled for controls Billet ergal Comes with bar-ends
In stock

$98.28 $88.45

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$102.70 $92.43
COMPATIBLE WITH ADJUSTABLE DUCABIKE REARSET (PR1199 01 / 02 / 03) + OEM REARSET INCLUDING THE FIXING SCREWS Made in Italy
In stock
Add to wish list

$107.25 $96.52
Bracket billet aaluminum Used to adjust the stroke of the master cylinder without having to pit A must for track / race bikes
In stock

$109.20 $98.28

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$109.20 $98.28
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS STREETFIGHTER 749 999 848 1098...
In stock

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$112.62 $101.36
Very stylish Billet Front Brake And Clutch Fluid Reservoir caps with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with application...
In stock

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS STREETFIGHTER 749 999 848 1098...
In stock

$126.77 $116.63
Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon Bolt on products, allowing fast and easy removal and/or...
In stock
Add to wish list

$129.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$129.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$139.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound Pads are 7.9 mm thick total Replacement from part number 107A48649
In stock
Add to wish list

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$146.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$175.00
Rear caliper kit Cast aluminum rear caliper with 2x34mm pistons. 84mm fixing centers.
In stock
Add to wish list

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$185.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound
In stock
Add to wish list

$193.70
The concept The meticolous observation of the braking system's dynamics has given birth to our "Brake Plate Radiator", particularly with the thermal energy...
In stock
Add to wish list

$199.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$203.39 $183.05

The DUCABIKE clutch slave cylinder makes for a smoother start and decreased clutch shudder.

In stock

$206.70 $186.03

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$225.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$229.32 $206.39

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$232.70 $209.43

DUCABIKE is synonym of passion for motorbike and in special way for Ducati® bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$232.70 $209.43

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$232.70 $209.43

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$251.16 $226.04

DUCABIKE is synonym of passion for motorbike and in special way for Ducat bikes. Bikes can be rich and precious designed by the owner based on own taste and requirements..

In stock

$253.50 $233.22
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$257.40 $236.81

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock

$258.70 $232.83
BILLET 7075 HARD OXIDE SURFACE TREATMENT RED ADJUSTER ALLOWS BRAKING TO BECOME MORE AGGRESSIVE OR FIRM BASED ON CONDITIONS OF ASPHALT AND TIRE WEAR. NEW...
In stock

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$269.00
Staubli Socket for Bleeder Plug; material: billet aluminum, anodized. This clean-break, non spill design, coupling prevents any loss of brake fluid and...
In stock
Add to wish list

$270.40 $243.36
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$271.64 $244.48

DUCABIKE is synonym of passion for motorbike and in special way for Ducat bikes. Bikes can be rich and precious designed by the owner based on own taste and requirements..

In stock

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$290.00
Piston size: 19 mm Distance center to center: 20 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4 Non Folding Lever
In stock
Add to wish list

$290.00
Piston size: 16 mm Distance center to center: 18 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4
In stock

$290.00
Piston size: 19 mm Distance center to center: 18 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4
In stock
Add to wish list

$295.00
The RCS 14mm has been designed for the rider who requires more brake performance and variation in brake lever feel when compared to a stock master cylinder....
In stock

$295.00
The RCS 16mm has been designed for the rider who requires more clutch performance and variation in clutch lever feel when compared to a stock master...
In stock

$309.00
Dry Brake Socket / quick disconnect, with 20 degree banjo fitting, billet aluminum, anodized. This banjo fitting (10mm, 3/8") quick disconnect can be...
In stock
Add to wish list

$310.70 $279.63

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$322.40 $296.61
STM
48T Plates kit for STM clutches Full kit with steel and friction Made in Italy
In stock
Add to wish list

$323.70 $291.33
Machined from solid billet aluminium Included a pair of Derlin bar-ends Steering damper bracket included Designed for 53mm forks Designed for track /...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$326.23 $293.61

DUCABIKE is synonym of passion for motorbike and in special way for Ducati® bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$326.23 $293.61

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$330.20 $303.78
On all of the latest Ducati motorcycles, the throttle twist grip no longer has the classic spool with steel wiring but only a digital potentiometer. Our...
In stock
Add to wish list

$330.20 $303.78
On all of the latest Ducati motorcycles, the throttle twist grip no longer has the classic spool with steel wiring but only a digital potentiometer. Our...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$339.89 $305.90

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$339.89 $305.90

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$353.54 $318.19

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$375.00
The most significant achievement is, that the 19RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$388.70 $349.83
BILLET 7075 HARD OXIDE SURFACE TREATMENT RED ADJUSTER ALLOWS BRAKING TO BECOME MORE AGGRESSIVE OR FIRM BASED ON CONDITIONS OF ASPHALT AND TIRE WEAR. NEW...
In stock

$452.40 $416.21
Electronic RBW throttle control for Ducati V2 & V4 Designed for racing use Quicker reponse - less rotation that stock! Works with OEM or...
In stock

$475.43
NCR
NCR CORSE Clip on Set in Titanium /Aluminum, racing version (53mm ID) Millona/New Blue/All model Ducati with fork Ohlins 43mm Availible in three...
In stock

$490.04 $441.04
Entirely machined from solid aluminum alloy with 3d technology Surface anodizing Compatible with dot 3/4 / 5.1 fluid (no mineral) Master...
In stock

$490.04 $441.04
Entirely machined from solid aluminum alloy with 3d technology Surface anodizing Compatible with dot 3/4 / 5.1 fluid (no mineral) Master...
In stock

$495.00
Rear caliper kit Billet aluminum rear caliper with 2x34mm pistons. 84mm fixing centers. Available in Natural hard anodized color black
In stock