HSBK Categories HSBK Categories

 

Product filters Product filters

Honda

$900.00
The dimensions of our top clamp are the same as stock which means you can position the height of the forks the same way as before. The top part of our...
In stock

$399.95
CBR600RR Linear Suspension Link 07-15 Rider feedback : Back end felt more stable. A lot more drive out of corners. No more bounce and not as much...
In stock
Add to wish list

$900.00
Honda CBR1000RR Triple Clamps 08+ Clear anodized. Stem, bottom and top clamp are made from 7075 aluminum. 25mm, 26mm, 27mm, 28mm, 29mm and 30mm offset....
In stock

$56.93 $52.38
Safe and Secure - The solid chain guard is designed with safety in mind, protecting the rider(s) from the motorcycles drive system. Budget Friendly -...
In stock
Add to wish list

$100.00
Made from Premium 420 Stainless Steel. Extremely Light Weight Design. Over 1 lbs. rotating mass weight reduction = More RWHP Optimal Design for Maximum...
In stock
Add to wish list

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M12X1.25X15 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$351.00 $315.90
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$91.00 $81.90
I2M
CNC Dash Brackets make installing your I2M dash simple and effortless.
In stock
Add to wish list

$250.00 $225.00
I2M
A carbon cover for both Chrome Lite and for Chrome Plus. It protects the aluminum case from sractches and dirt in case of a crash. The cover is easily...
In stock
Add to wish list

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play Aprilia RSV4 21+...
In stock

$1,560.00 $1,404.00
I2M

Much more than a dashboard

In stock

$2,340.00 $2,106.00
I2M

The new evolution in the Chrome family

In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$3,055.00 $2,749.50
I2M

Chrome PRO: designed for the most demanding pilot

In stock

Contact us for a price
I2M
Danas is a free software developed in Java to be able to analyze data collected from I2M systems from miniLAP to Dasy or Chrome. The choice of developing...
In stock

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$126.10 $116.01
Our kit dubbed "Kill switch" has the function of replacing the key lock on motorcycles destined for race use. It is supplied in combination with the KEY BOX...
In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification. The switch panels are plug & play and specified for each motorbike.

In stock
Add to wish list

$257.40 $236.81

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock

$330.20 $303.78

Jetprime switch panel is interchangeable with the OEM switch and applicable on the handlebars of any motorbike with minimal modifications.

In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$761.80 $700.86

Jetprime switch panel is interchangeable with the OEM switch and applicable on the handlebars of any motorbike with minimal modifications.

In stock
Add to wish list

$387.40 $356.41

Jetprime switch panel is interchangeable with the OEM switch and applicable on the handlebars of any motorbike with minimal modifications.

In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the 2D dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC machined...
In stock
Add to wish list

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$266.50 $239.85
Melotti Racing’s Impact Absorber for I2M Chrome has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined from...
In stock

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$22.99 $19.98
Prevents loss of coolant due to overheating Works on most water-cooled motorcycles, snowmobiles, and ATV's Designed for hot weather and/or...
In stock
Add to wish list

$499.95 $459.95
Complete seat for CRF1000L Africa Twin 2016 & Up two-seater model with fiberglass bottom. Saddle is covered in non-slip suede material Two-seater seat...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$220.00 $198.00
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$557.70 $501.93
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$234.00 $210.60
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$416.00 $374.40
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$127.40 $114.66
Levers made from Aluminum billet and completely CNC machined; This Levers has been used in the Racing industry for many years due to its technical...
In stock

$127.40 $114.66
Levers are made from Aluminum billet and completely CNC machined; This Levers has been used in the Racing industry for many years due to its technical...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list