HSBK Categories HSBK Categories

 

Product filters Product filters

Ninja ZX10R

$495.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$475.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$84.95

SnakeSkin kit includes right and left tank grips, frame grips, and a center tank protector.

In stock
Add to wish list

$184.95

The Sunstar 520 RTG1 Works Tripleguard Sealed Racing Chain has exclusively been used by the HSBK Racing team since 2012.

In stock
Add to wish list

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$269.00
Staubli Socket for Bleeder Plug; material: billet aluminum, anodized. This clean-break, non spill design, coupling prevents any loss of brake fluid and...
In stock
Add to wish list

$225.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$309.00
Dry Brake Socket / quick disconnect, with 20 degree banjo fitting, billet aluminum, anodized. This banjo fitting (10mm, 3/8") quick disconnect can be...
In stock
Add to wish list

$199.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$79.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$169.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M30x1.5 Made in Italy
In stock

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy Designed for the following bikes 18 ZX-6R 16...
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$218.40 $196.56
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Will also fit the Tuono V4 Factory that...
In stock

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$557.70 $501.93
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy Designed for the following models Ninja 400 (all...
In stock
Add to wish list

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$220.00 $198.00
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$259.95

Kawasaki ZX-10R / SE / KRT / RR 2016 > 2019 7 Piece OEM Replacement Samco Sport Silicone Hose Kit

In stock

$273.95
Kawasaki ZX 10R 2011-2015 6 Piece OEM Replacement Samco Sport Silicone Hose Kit
In stock

$318.95
Kawasaki ZX-10R / SE / KRT / RR 2016 > 2019 4 Piece Samco Sport Y-Piece Race Design Silicone Radiator Coolant Hose Kit
In stock

$296.95
Kawasaki ZX 10R 2011-2015 4 Piece Y-Piece Race Design Samco Sport Silicone Radiator Coolant Hose Kit
In stock

$90.95

Kawasaki ZX 10R 2011-2015 2 Piece Oil Tank Samco Sport Silicone Radiator Coolant Hose Kit

In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$109.95 $101.15
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock
Add to wish list

$298.95 $275.03
Custom hand made seat designed for racing use. Covered with a 3 mm layer of high density special mousse. This is the same material chosen by most MotoGP ,...
In stock
Add to wish list

$279.95 $257.55
Custom hand made seat designed for racing use. Covered with a 3 mm layer of high density special Mousse. This is the same material chosen by most MotoGP ,...
In stock
Add to wish list

$279.95 $257.55
Custom sporty seat made from our "street neoprene" material. This is a non-slip fabric which allows for good grip as well as changing positions easily. A...
In stock
Add to wish list

$395.00
Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view below for the tool in...
In stock
Add to wish list

$495.00
Pneumatic Preload Adjuster for Ohlins TTX shocks: V2, ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an adapter). These type of...
In stock
Add to wish list

$193.70
The concept The meticolous observation of the braking system's dynamics has given birth to our "Brake Plate Radiator", particularly with the thermal energy...
In stock
Add to wish list

$22.99 $19.98
Prevents loss of coolant due to overheating Works on most water-cooled motorcycles, snowmobiles, and ATV's Designed for hot weather and/or...
In stock
Add to wish list

$164.99

The most advanced variable rate throttle in the world.

In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$266.50 $239.85
Melotti Racing’s Impact Absorber for I2M Chrome has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined from...
In stock

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the 2D dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC machined...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$100.00
Made from Premium 420 Stainless Steel. Extremely Light Weight Design. Over 1 lbs. rotating mass weight reduction = More RWHP Optimal Design for Maximum...
In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the OEM switch and applicable on the handlebars of any motorbike with minimal modifications.

In stock
Add to wish list

$257.40 $236.81

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock

$387.40 $356.41

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$637.00 $586.04
The new intake trumpet surfaces have been optimized by an extended use of CFD (computational fluid dynamic) software and bench tests. The new geometry...
In stock
Add to wish list

$126.10 $116.01
Our kit dubbed "Kill switch" has the function of replacing the key lock on motorcycles destined for race use. It is supplied in combination with the KEY BOX...
In stock
Add to wish list

$452.40 $416.21

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$257.40 $236.81

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$312.00 $280.80
I2M
The control panel has seven buttons, the two UP and DOWN above allow to directly control the chrome by connecting to the auxiliary socket for external keys...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

Contact us for a price
I2M
Danas is a free software developed in Java to be able to analyze data collected from I2M systems from miniLAP to Dasy or Chrome. The choice of developing...
In stock

$3,055.00 $2,749.50
I2M

Chrome PRO: designed for the most demanding pilot

In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$2,340.00 $2,106.00
I2M

The new evolution in the Chrome family

In stock

$1,560.00 $1,404.00
I2M

Much more than a dashboard

In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play Aprilia RSV4 21+...
In stock

$250.00 $225.00
I2M
A carbon cover for both Chrome Lite and for Chrome Plus. It protects the aluminum case from sractches and dirt in case of a crash. The cover is easily...
In stock
Add to wish list

$91.00 $81.90
I2M
CNC Dash Brackets make installing your I2M dash simple and effortless.
In stock
Add to wish list

$312.00 $280.80
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25 - 15mm, 20mm, 25mm, 30mm) Titanium is the strongest when compared to other metals. Its unsurpassed...
In stock

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$24.95 $19.96
HRT
HRT Titanium lambda plug and washers are pre-drilled for safety wire to keep things in place and direct replacement fitment on any performance exhaust with...
In stock

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M12X1.25X15 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$56.93 $52.38
Safe and Secure - The solid chain guard is designed with safety in mind, protecting the rider(s) from the motorcycles drive system. Budget Friendly -...
In stock
Add to wish list

$399.95
Kawasaki ZX-10R Linear Suspension Link This link keeps the suspension’s rising rate more linear for added traction and a better better power delivery....
In stock
Add to wish list

$900.00
The dimensions of our top clamp are the same as stock which means you can position the height of the forks the same way as before. Clear anodized Stem,...
In stock

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$700.00
Febur radiators are produced with the help of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin Go, MV...
In stock

$2,200.00
Febur radiators are produced with the help of the best world teams: Team Barni, Suzuki Crescent, JIR Moto 2, Lorenzini by Leoni , MV Agusta Parkin Go, MV...
In stock

$2,200.00
These radiators are designed in collaboration with the best teams in the world: Team Barni, Suzuki Crescent, JIR moto 2, Lorenzini by Leoni, MV Agusta...
In stock

$4,800.00
The lightening and the evolution of the structure guarantee better maneuverability and sensitivity on the rear. Original wheel or with 25mm pin. Complete...
In stock

$1,274.00
Carbon Fiber load bearing rear subframe / tail section Eliminates rear subframe Weight: 1500 grams The carbon fiber of this object was treated in an...
In stock
Add to wish list

$3,400.00
Capacity: 22 liters Weight: about 3500 grams Complete with ergal screw cap Carbon Fiber front tank cover sold seperately
In stock
Add to wish list

$3,400.00
Capacity: 24 liters Weight: about 3500 grams Complete with ergal screw cap Carbon Fiber front tank cover sold seperately
In stock

$489.95
Designed for race / track use
In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$50.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Easy open lid ideal...
In stock
Add to wish list

$349.95
Natural fiber of volcanic lava has some unique features of its kind, vacuum processed in pressure tank and the possibilty to create a 50% lighter components...
In stock
Add to wish list

$37.70 $33.93
Specific synthetic fiber and embroidered logo. Protect the grips during the winter and when the bike has to be handles by the mechanic Sold as a pair
In stock
Add to wish list

$53.63 $48.27

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$22.63 $20.37
Can be used on the front or rear master cylinder M10x1mm
In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$339.89 $305.90

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$339.89 $305.90

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$353.54 $318.19

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list