HSBK Categories HSBK Categories

 

Product filters Product filters

Brake / Clutch / Controls

$1,499.00
This new Brembo “.484” caliper is made entirely from billet, starting with a block of aluminum machined with the most modern CNC technologies available. The...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$62.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Made in Italy
In stock
Add to wish list

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$495.00
Rear caliper kit Billet aluminum rear caliper with 2x34mm pistons. 84mm fixing centers. Available in Natural hard anodized color black
In stock

$799.00
Cast aluminum monobloc (1 piece) calipers 4 x 30mm pistons. Moto GP styled cooling fins Natural paint finish Fits most Japanese sport bikes (108mm...
In stock
Add to wish list

$1,549.00
The two piece caliper range are produced from CNC machined billet aluminum. Nickel coating caliper body; 4x32mm piston diameter; Complete with Z03 brake...
In stock
Add to wish list

$1,549.00
The two piece caliper range are produced from CNC machined billet aluminum. Nickel coating caliper body; 4x32mm piston diameter; Complete with Z03 brake...
In stock
Add to wish list

$1,399.00
Brembo Caliper Set P4 30/34mm GP4-RB 2-Pin Billet 2-Piece 100mm Radial Mount Hard-Anodized Black
In stock
Add to wish list

$1,399.00
The two piece caliper range are produced from CNC machined billet aluminum and are available in hard anodized. Interchangeable with 108mm Brembo calipers;...
In stock
Add to wish list

$150.00
Mechanical clutch lever – Kawasaki
In stock
Add to wish list

$775.00
Developed with the precise goal of offering all owners of the most popular European and Japanese hypersports models maximum performance both on the road and...
In stock
Add to wish list

$775.00
Developed with the precise goal of offering all owners of the most popular European and Japanese hypersports models maximum performance both on the road and...
In stock
Add to wish list

$575.00
Developed with the precise goal of offering all owners of the most popular European and Japanese hypersports models maximum performance both on the road and...
In stock
Add to wish list

$575.00
Developed with the precise goal of offering all owners of the most popular European and Japanese hypersports models maximum performance both on the road and...
In stock
Add to wish list

$699.00
Using technology developed in Moto GP this revolution in brake rotor technology takes performance to a new level. The patented T drive system allows the...
In stock
Add to wish list

$699.00
Cast aluminum monobloc (1 piece calipers) with 4 x 30mm pistons. Natural paint finish Fits most Japanese sport bikes (108mm fixing) Kit comprises 2...
In stock
Add to wish list

$799.00
Cast aluminum 1 piece calipers with 4x30mm pistons Natural paint finish Fits most European sport bikes (100mm fixing) Kit comprises 2 calipers complete...
In stock
Add to wish list

$595.00
Rear caliper kit CNC machining caliper body; Nickel coating; P2 x 34 mm piston size; Interchangeable with OE Brembo calipers;
In stock
Add to wish list

$175.00
Rear caliper kit Cast aluminum rear caliper with 2x34mm pistons. 84mm fixing centers.
In stock
Add to wish list

$290.00
Piston size: 16 mm Distance center to center: 18 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4
In stock

$290.00
Piston size: 19 mm Distance center to center: 18 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4
In stock
Add to wish list

$290.00
Piston size: 19 mm Distance center to center: 20 mm Forged aluminum Weight: 286/306 grams Brake fluid DOT 4 Non Folding Lever
In stock
Add to wish list

$372.00
The most significant achievement is, that the 17RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$375.00
The most significant achievement is, that the 19RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily...
In stock
Add to wish list

$295.00
The RCS 14mm has been designed for the rider who requires more brake performance and variation in brake lever feel when compared to a stock master cylinder....
In stock

$32.00
TT H38 GF pad kit for 20.6950.xx / 20.6951.xx caliper
In stock
Add to wish list

$139.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound Pads are 7.9 mm thick total Replacement from part number 107A48649
In stock
Add to wish list

$742.50
What does it do and what is Blip Box? This miniature module provides an fully programmable throttle 'auto blip' when ever a down-shift registered via...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest MotoGP teams Dual-compound design with firm inner and softer outer compound for...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$353.54 $318.19

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$339.89 $305.90

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$339.89 $305.90

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$22.63 $20.37
Can be used on the front or rear master cylinder M10x1mm
In stock
Add to wish list

$53.63 $48.27

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$37.70 $33.93
Specific synthetic fiber and embroidered logo. Protect the grips during the winter and when the bike has to be handles by the mechanic Sold as a pair
In stock
Add to wish list

$50.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Easy open lid ideal...
In stock
Add to wish list

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$312.00 $280.80
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$452.40 $416.21

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$100.00
Made from Premium 420 Stainless Steel. Extremely Light Weight Design. Over 1 lbs. rotating mass weight reduction = More RWHP Optimal Design for Maximum...
In stock
Add to wish list

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$164.99

The most advanced variable rate throttle in the world.

In stock
Add to wish list

$193.70
The concept The meticolous observation of the braking system's dynamics has given birth to our "Brake Plate Radiator", particularly with the thermal energy...
In stock
Add to wish list

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$557.70 $501.93
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$218.40 $196.56
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Will also fit the Tuono V4 Factory that...
In stock

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$169.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$79.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$199.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$309.00
Dry Brake Socket / quick disconnect, with 20 degree banjo fitting, billet aluminum, anodized. This banjo fitting (10mm, 3/8") quick disconnect can be...
In stock
Add to wish list

$225.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$269.00
Staubli Socket for Bleeder Plug; material: billet aluminum, anodized. This clean-break, non spill design, coupling prevents any loss of brake fluid and...
In stock
Add to wish list

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list