HSBK Categories HSBK Categories

 

Product filters Product filters

YZF R1

Contact us for a price
I2M
Danas is a free software developed in Java to be able to analyze data collected from I2M systems from miniLAP to Dasy or Chrome. The choice of developing...
In stock

$0.00
DID
In developing the Pro-Street VX Series, D.I.D focused on improving chain “Rigidity”. Traditionally, “Tensile Strength” has been used to measure the strength...
In stock

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$5.95 $4.76
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Rear Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list

$6.95 $5.56
HRT
HRT Titanium Large Button Head Fairing Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$8.95 $7.16
HRT
HRT Titanium Hex Flange Head Bolt (M8x1.25x15, 20, 30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes...
In stock

$12.25 $9.99
NGK
NGK IX Iridium Series plugs were designed specifically for the performance enthusiast. Fine wire center electrode ensures high durability and a...
In stock

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$11.95 $9.56
HRT
The special design banjo bolt reduces the formation of air bulbs in the hydraulic system, which simplifies the bleeding of the braking system. Available...
In stock

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00
Features Reservoir volume : 15ml. Cap Diameter (D1) : 38.4mm ( 1.51 in ) Cup Diameter (D2) : 31.0mm ( 1.22 in ) Cup Height (H1) : 38.9mm ( 1.53 in...
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$14.95 $11.96
HRT
HRT Titanium Hex Flange Large Head Bolt (M8x1.25x30) Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$15.00
Features Reservoir volume : 30ml. Cap Diameter (D1) : 51.5mm ( 2.03 in ) Cup Diameter (D2) : 42.2mm ( 1.66 in ) Cup Height (H1) : 48.7mm ( 1.92 in...
In stock
Add to wish list

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$22.99 $19.98
Prevents loss of coolant due to overheating Works on most water-cooled motorcycles, snowmobiles, and ATV's Designed for hot weather and/or...
In stock
Add to wish list

$20.00 $16.00
DNA
DNA AIR FILTER SERVICE KIT (220 ML OIL & 270 ML CLEANER)
In stock
Add to wish list

$22.63 $20.37
Can be used on the front or rear master cylinder M10x1mm
In stock
Add to wish list

$22.95
11.5 mm fits most metric / sportbike wheels 8.5 mm fits most aftermarket wheels & Italian motorcycles Billet aluminum construction Makes checking tire...
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest MotoGP teams Dual-compound design with firm inner and softer outer compound for...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$29.95
Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today. Superlite front...
In stock

$29.95 $23.96
HRT
TI OIL DRAIN PLUG W CRUSH WASHER M14X1.5X12 Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock
Add to wish list

$30.00
Febur High-Pressure Radiator Cap Features: Upgrading to a high-pressure radiator cap is the simplest and least expensive way to avoid over-boiling your...
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M27x3 Made in Italy
In stock

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$37.70 $33.93
Specific synthetic fiber and embroidered logo. Protect the grips during the winter and when the bike has to be handles by the mechanic Sold as a pair
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$45.00
AIM
This kit comes with everything you need to mount your AiM Solo / Solo 2 / Solo DL / Solo DL 2 to your triple clamp on your Yamaha R1/R6
In stock
Add to wish list

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$49.40 $44.46
Sold as a set Made in Italy
In stock
Add to wish list

$49.95 $44.95
This Yamaha Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock
Add to wish list

$50.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Easy open lid ideal...
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$53.63 $48.27

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$54.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$56.93 $52.38
Safe and Secure - The solid chain guard is designed with safety in mind, protecting the rider(s) from the motorcycles drive system. Budget Friendly -...
In stock
Add to wish list

$57.20 $51.48
The “Corsa” wheel axle protection are born on the race fields to simplify the change of wheels in the box and they are now available for your supersports...
In stock
Add to wish list

$57.20 $51.48
Designed for use in the WSSP and WSBK championships, this kit replaces the original connection plastic fitting installed on brake and clutch master...
In stock
Add to wish list

$62.00
Master cylinder brake reservoir / bracket kit Brembo fluid reservoir and hardware needed for aftermarket brake master cylinder kits Made in Italy
In stock
Add to wish list

$63.70 $57.33
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$63.70 $57.33
The “Corsa” wheel axle protection are born on the race fields to simplify the change of wheels in the box and they are now available for your supersports...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$65.00
Yamaha R1 aluminum ECU bracket. Works with veriety of race bodywork Has dampening pads to protect your ECU from shock and crashes FOR CLOSED...
In stock
Add to wish list

$65.00
AIM
AiM Yamaha R1 (15+) R6 (17+) Solo 2 / DL GPS Harness Kit
In stock
Add to wish list

$69.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$69.95
R1 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4pcs Set (1 Front Plate, 2...
In stock

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$72.95
Superlite RS8-RR Series alloy race sprockets are manufactured to be extremely light yet durable for big horsepower applications. If you're looking to...
In stock

$75.00
Bikesplast front fender for the Yamaha YZF-R6 & R1. Bikesplast fender cover is manufactured from GFK fiberglass FLEXI and comes with a white gel coat...
In stock
Add to wish list

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$78.00 $70.20
It Is essential to limit the steering angle of race motorbikes, with this racing component is not necessary any more the use of the classic balancing...
In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

$89.95 $79.95
NGK
NGK Racing Series plugs are engineered to withstand the harshest engine conditions. Special insulator nose configurations improve throttle response....
In stock
Add to wish list

$83.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) From the demands of the Isle of Man TT to the circuits of the World...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$88.80 $71.04
DNA
DNA High Performance Air Filter for the following Yamaha model: YZF R1 1000 2015 & Up OEM Air Filter Air Flow: 164.80 CFM DNA Air Filter Air Flow:...
In stock
Add to wish list

$89.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) A full metal compound using the patented Array Cooling technology. As...
In stock
Add to wish list

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play Aprilia RSV4 21+...
In stock

$91.00 $81.90
I2M
CNC Dash Brackets make installing your I2M dash simple and effortless.
In stock
Add to wish list

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$115.70 $106.44
Save weight and don't worry about loosing your key on your race / track bike. Will work with YEC and modified stock harness Works on USA bikes without an...
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ÂĽ Quick turn release Made in Italy
In stock
Add to wish list

$123.95
Yamaha YZF R1 / R1M 15-19 FZ 10 / MT 10 16-19 3 Piece Samco Sport Performance Silicone Cooling Hose Set
In stock

$129.95 $119.55
RaceSeats universal superbike seat pad is a universal racing seat designed to fit most Superbike tail sections. Made for race and track use and attached...
In stock

$136.50 $125.58
MUST BE USED WITH YEC ECU Constructed in special plastic material by turning and milling. Made in Italy
In stock
Add to wish list

$139.00
Listing is for 2 pads, which is 1 caliper (4 pads needed for 2 calipers) Z04 dedicated racing compound Pads are 8.5mm thick Fit the following...
In stock
Add to wish list

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$146.40 $117.12
DNA
DNA High Performance Air Filter for the following Yamaha model: YZF R1 1000 2015 & Up OEM Air Filter Air Flow: 175.40 CFM DNA Air Filter Air Flow:...
In stock
Add to wish list

$150.00
Mechanical clutch lever for OEM clutch perch
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$159.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$179.95 $161.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$175.00
Super lightweight fairing stays for your track / race motorcycle. Handcrafted from aerospace aluminium alloy. Much cheaper replacement of the OEM fairing...
In stock

$175.00
Rear caliper kit Cast aluminum rear caliper with 2x34mm pistons. 84mm fixing centers.
In stock
Add to wish list

$175.00
Bikesplast SBK tank cover for the 2015+ Yamaha YZF-R1. Bikesplast tank cover is manufactured from GFK fiberglass FLEXI and comes with a white gel coat...
In stock
Add to wish list

$175.00
Bikesplast SBK tank cover for the 2020+ Yamaha YZF-R1. Bikesplast tank cover is manufactured from GFK fiberglass FLEXI and comes with a white gel coat...
In stock
Add to wish list

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$184.95

The Sunstar 520 RTG1 Works Tripleguard Sealed Racing Chain has exclusively been used by the HSBK Racing team since 2012.

In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$199.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$199.80
Made of aluminum Transparent side tube to check the inside liquid level Two side spouts for entry / exit or entry only For racing use only Sizes130mm x...
In stock
Add to wish list

$199.95
Quality European made carbon fiber for the Yamaha R6 17+ & R1 15+
In stock
Add to wish list

$199.95
Quality European made carbon for the Yamaha R1 2015+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$220.00 $198.00
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$225.00
Super lightweight fairing stays for your track / race motorcycle. Handcrafted from aerospace aluminium alloy. Much cheaper replacement of the OEM fairing...
In stock
Add to wish list

$225.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$225.00
Super lightweight fairing stays for your track / race motorcycle. Handcrafted from aerospace aluminium alloy. Much cheaper replacement of the OEM fairing...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the 2D dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC machined...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$249.95 $229.95
2015+ Yamaha R1 driver seat with carbon-fiber bottom and OEM attachment points RaceSeats sport seat suitable for mix road-racing and street use. Made of...
In stock
Add to wish list

$249.95
Quality European made carbon for the Yamaha R1 2015+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$249.95
Quality European made carbon for the Yamaha R1 2020+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$250.00 $225.00
I2M
A carbon cover for both Chrome Lite and for Chrome Plus. It protects the aluminum case from sractches and dirt in case of a crash. The cover is easily...
In stock
Add to wish list

$254.80 $229.32
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Remote Adjuster sold seperately Made in...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$257.40 $231.66
Specially designed for the 2015 & Up Yamaha R1 Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$265.95
DID
The newest race chain from DID is the 520ERV7. Upgraded from the 520ERV3, the 520ERV7 boasts a 3% higher tensile strength (now rated to 1000cc), a 13%...
In stock
Add to wish list

$266.50 $239.85
Melotti Racing’s Impact Absorber for I2M Chrome has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined from...
In stock