HSBK Categories HSBK Categories

 

Product filters Product filters

Hypermotard 821 / 939 / 950

$0.00
DID
In developing the Pro-Street VX Series, D.I.D focused on improving chain “Rigidity”. Traditionally, “Tensile Strength” has been used to measure the strength...
In stock

$1.50
Ducati Oil Drain Plug Crush Washer Sold individually Crush washers are supplied in either copper or aluminium depending on our stock.
In stock

$6.95 $5.56
HRT
Titanium Front Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list


$15.95 $12.76
HRT
Titanium Front Brake Caliper Race Spec Bolt Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect...
In stock

$16.64
Widely used in the Racing sector, it has been designed to preserve the bodywork from accidental leakage of fluid, as well as to protect the fluid against UV...
In stock

$17.95
Couple of thermoplastic rubber Grips Material: Thermoplastic Colour: Black Length: 120 mm Grip end: Open Diameter Handlebars/Throttle Tubes: 22/26 mm...
In stock
Add to wish list

$19.95
CRG

This is the Billet Internal Adapter for the Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors.

In stock
Add to wish list

$20.00 $16.00
DNA
DNA AIR FILTER SERVICE KIT (220 ML OIL & 270 ML CLEANER)
In stock
Add to wish list

$20.80 $18.72
BILLET ALLUMINIUM, ANODIZATION COLORED SURFACE COMPLETE FOR MOUNTING ELIMINATES CABLE CLUTCH CONTROL IN CASE OF INSTALLATION OF OUR HYDRAULIC CLUTCH CONTROL...
In stock

$20.80 $18.72

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$22.53 $20.28
WORKED FROM FULL ALLOY WITH COLORED ANODIZATION HOLES FOR LOCKING IN PROCEDURAL RACING USE THROUGH WIRE IRON
In stock

$22.63 $20.37
Can be used on the front or rear master cylinder M10x1mm
In stock
Add to wish list

$22.95
11.5 mm fits most metric / sportbike wheels 8.5 mm fits most aftermarket wheels & Italian motorcycles Billet aluminum construction Makes checking tire...
In stock

$22.96
Desinged for wet clutch Set of 3 Made in USA Fits these Bikes: 2016-2018 Ducati 959 Panigale 2017-2018 Ducati Hypermotard 939/939 SP 2018 Ducati...
In stock
Add to wish list

$24.70 $22.23
Billet aluminum 7075 Made in Italy Designed for the following models: 848 / 1098 / 1198 899 / 959 / 1199 / 1299 / V4 PANIGALE...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest MotoGP teams Dual-compound design with firm inner and softer outer compound for...
In stock

$24.95
Designed exclusively for road race competition, proven by the fastest WSBK teams Couple of thermoplastic dual compound rubber grips with multiconic...
In stock

$24.95 $19.96
HRT
Titanium Single Brake / Clutch M10x1.0 Single Banjo w Bleeder
In stock
Add to wish list

$28.60 $25.74
Billet oil fill cap with pre-drilled hole for safety wire Made in Italy Fits the following models: HYM 796 / 821 / 939 SF848 - 848 M696 / 796 /...
In stock

$32.00
TT H38 GF pad kit for 20.6950.xx / 20.6951.xx caliper
In stock
Add to wish list

$32.76 $29.48
BILLET ALLUMINIUM 7075 ANODIZE COLOR TREATMENT Made in ITALY Designed for the following models: 848 / 1098 / 1198 899 / 959 / 1199 / 1299 / V4...
In stock

$34.12 $30.71
Designed for DucaBike rearset as well as independent DucaBike brake / clutch pedals Billet aluminum and anodized to perfection Adjustable eccentric...
In stock

$34.13 $30.72

DUCABIKE is synonym of passion for motorbike and in special way for Ducati® bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$36.00
Brembo spacer and bolt kit for upgrading your motorcycle with Brembo Calipers and/or Rotors.
In stock

$37.70 $33.93

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$37.70 $33.93

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$37.96 $34.16

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$38.95
Superlite RS Series steel sprocket kits shave unsprung "rotating" weight which in turn provides better acceleration, braking and handling. All kits include...
In stock

$39.00 $35.10
Complete with assembly instructions Interchangeable with the originals 5 or 6-piece kit External dimension increased compared to the original for...
In stock

$39.90 $31.92
HRT
HRT Ducati Titanium Rear Swingarm Pinch Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it...
In stock
Add to wish list

$42.00 $37.80
Very stylish Billet Front Brake Fluid Reservoir cap. Billet aluminum, followed by surface anodized It replaces the original cap. Plug & Play
In stock

$42.95 $34.36
HRT
Titanium Front Axle Nut Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when you need strong...
In stock
Add to wish list

$44.95

Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today.

In stock

$66.95 $61.96
CRG
The Blindsight Bar End Mirror is intended to be used in conjunction with a left side mounted Hindsight or stock mirrors. This little assembly will clean up...
In stock

$47.78 $43.00

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$47.78 $43.00

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$49.14 $39.31
HRT
Titanium rear sprocket carrier nuts kit contains 5 or 6 (select from drop down menu) nuts which is made from solid CNC billet titanium and finished to a...
In stock

$49.95 $44.95
This Ducati Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock

$50.51 $45.46

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$50.70 $45.63
BILLET ALUMINUM ANODIZED COLORED SURFACE KIT 2 CAPS READY TO ASSEMBLY
In stock

$50.70 $45.63
Machined Steel & Aluminum Anodized surface with treatment Kit arrives ready to assemble Large base helps stabalize your Ducati when parked on hot...
In stock

$51.20 $46.08
Very stylish Billet Front Brake And Clutch Fluid Reservoir caps with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with...
In stock

$52.00 $46.80

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$53.24
Complete kit designed for the Ducati radial clutch master cylinder . Kit includes: Tank complete with cap (45 cc) Mounting bracket Rubber hose...
In stock
Add to wish list

$53.63 $48.27
Very stylish Billet Front Brake Fluid Reservoir cap with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with application of carbon...
In stock

$53.63 $48.27
Very stylish Billet Front Brake Fluid Reservoir cap with a Carbon Fiber Inlay. Billet aluminum, followed by surface anodized with application of carbon...
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$55.95
Must be used with Superlite PCD-1, PCD-2 or MVACAR billet aluminum "Quick Change" Sprocket Carrier Exclusive tooth profile for extended mileage output...
In stock

$56.88 $51.19
Designed for DucaBike rearset as well as independent DucaBike brake / clutch pedals Billet aluminum and anodized to perfection Folds in case of a crash...
In stock
Add to wish list

$81.95 $75.46
CRG
The Hindsight Bar End Mirror is best functioning, highest quality motorcycle mirror you'll find anywhere. We use custom convex glass formed to our own...
In stock

$61.43 $55.29
KIT READY FOR ASSEMBLY ASSEMBLY ON THE FRONT WHEEL STUD PROTECTS LEGS FORK IN CASE OF FALL Designed for the following bikes 848 - 1098 - 1198...
In stock

$62.95
Must be used with Superlite PCD-1 or PCD-2 billet aluminum "Quick Change" Sprocket Carriers Exclusive tooth profile for extended mileage output Induction...
In stock

$65.52
Complete kit designed for the Ducati radial clutch master cylinder . Kit includes: Tank complete with cap (45 cc) Mounting bracket Rubber hose...
In stock
Add to wish list

$71.50 $64.35
KIT READY FOR ASSEMBLY ASSEMBLY ON THE FRONT WHEEL STUD PROTECTS LEGS FORK IN CASE OF FALL Designed for the following bikes 848 - 1098 - 1198...
In stock

$74.75 $67.27

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$75.80 $60.64
DNA

The DNA High performance air filter is a high quality next generation multilayer cotton gauze oil impregnated air filter.

In stock
Add to wish list

$76.44 $68.80

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$102.40
CRG
The Hindsight LS (Lane Split) Bar End Mirror was created by adding the folding / retractable feature to the original Hindsight. There are two primary...
In stock

$80.00
All new design made even stronger with kevlar & epoxy backing. Our line of Carbon Fiber is the strongest, most flexible & best looking carbon fiber...
In stock
Add to wish list

$88.73 $79.86

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$88.95
Fits variety of Ohlins damper.
In stock
Add to wish list

$99.99
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$102.70 $92.43

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$106.60 $95.94
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS Designed for the...
In stock

$107.38 $96.64
Machined from solid alloy Anodized surface with treatment with application of carbon fiber. Kit arrived ready to assemble
In stock

$107.84 $97.06

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$107.84 $97.06

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$119.95 $107.96
CRG
The CRG Arrow Bar End Mirror is the ideal application for modern, performance sportbikes and naked sportbikes. Aerodynamic styling in billet aluminum...
In stock
Add to wish list

$109.95
The CPro is only available to fit the Calipers that use two pads per caliper like the M4, M50, GP4-RX and the Silver line Two piece cast radial calipers...
In stock
Add to wish list

$111.93 $100.74
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS DIAVEL / MTS 950 - 1100 - 1000...
In stock

$112.62 $101.36

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$115.70 $104.13

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$119.60 $107.64
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS Designed to fit the following...
In stock

$123.50 $111.15
BILLET ALLOY ANODIZE COLOR TREATMENT PLEXIGLAS AND CARBON COVER PROVIDED IN THE KIT + SCREWS
In stock

$128.70 $115.83

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$139.00
Listing is for 2 pad, which is 1 caliper set Z04 dedicated racing compound Pads are 7.9 mm thick total Replacement from part number 107A48649
In stock
Add to wish list

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED...
In stock
Add to wish list

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED license...
In stock
Add to wish list

$139.95
DS-1 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$139.98
Special 120-link, racing chain. Now availible in 520, 525, or 530 pitch Comes in "Ducati Red" color Designed to guarantee top efficiency and...
In stock

$141.70 $127.53
THE KIT ALLOWS THE ASSEMBLY OF THE KIT DUCABIKE "CCDV02" CLEAR CLUTCH COVER, WITHOUT ANY MODIFY IN THE ENGINE OF SERIES, PLUG AND PLAY. COMPLETE WITH...
In stock
Add to wish list

$141.70 $127.53
THE KIT ALLOWS THE ASSEMBLY OF THE KIT DUCABIKE "CCDV02" CLEAR CLUTCH COVER, WITHOUT ANY MODIFY IN THE ENGINE OF SERIES, PLUG AND PLAY. COMPLETE WITH...
In stock
Add to wish list

$141.70 $127.53
THE KIT ALLOWS THE ASSEMBLY OF THE KIT DUCABIKE "CCDV01/02" CLEAR CLUTCH COVER, WITHOUT ANY MODIFY IN THE ENGINE OF SERIES, PLUG AND PLAY. COMPLETE WITH...
In stock
Add to wish list

$146.95
DS-2 - DUAL SINTER - DYNAMIC RACING CONCEPT FRONT - FOR RACE USE ONLY The choice of numerous World Champions in Superbike, Supersport, Moto2 and...
In stock
Add to wish list

$148.79 $133.91

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.


In stock

$149.95
Unlike the stock rubber Ducati cush drive hub sets, new Superlite Hyperflexx Polyurethane Cush Drive hubs have been engineered to provide longer lasting...
In stock

$165.00

High quality Carbon Fiber with the same weave as OEM parts.

In stock
Add to wish list

$167.70 $150.93

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious designed by the owner based on own taste and requirements..

In stock

$175.00
Rear caliper kit Cast aluminum rear caliper with 2x34mm pistons. 84mm fixing centers.
In stock
Add to wish list

$176.09 $158.48
Cap Quick Release Billet Alloy Surface Anodized Carbon Key Included Plug & Play Comes with new O-ring & SS Hardware Designed for the following model...
In stock

$180.70 $162.63

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$180.70 $162.63
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS Designed to fit the following...
In stock

$180.70 $162.63
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS Designed for the...
In stock

$183.70
DID
Chain Color: Natural inner plates/Gloss Black outer plates Masterlink Included: (1) Rivet Style connecting link Weight: 4.31 lbs. (120 Links) Tensile...
In stock

$184.95

The Sunstar 520 RTG1 Works Tripleguard Sealed Racing Chain has exclusively been used by the HSBK Racing team since 2012.

In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$189.74 $170.77

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious designed by the owner based on own taste and requirements..

In stock

$189.74 $170.77
BILLET ALLOY ANODIZE COLOR TREATMENT
In stock

$189.95
Drive Systems has been producing Quick Change components since 1994 and we are the industry leader when it comes to Ducati Quick Change sprocket assemblies....
In stock

$193.70 $174.33
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM HAS OPTION FOR TWO DIFFERENT HEIGHTS EASY INSTALLATION WITHOUT ANY ADDITIONAL...
In stock

$193.70 $174.33
BILLET ALUMINUM HARD ANODIZE SURFACE TREATMENT ALLOWS ADJUSTMENT OF LEVER THROUGH 5 POSITIONS FOLDS IN THE CASE OF A IMPACT SOLD AS A SET IF YOU NEED...
In stock

$193.70
The concept The meticolous observation of the braking system's dynamics has given birth to our "Brake Plate Radiator", particularly with the thermal energy...
In stock
Add to wish list

$193.70 $174.33

The DUCABIKE clutch slave cylinder makes for a smoother start and decreased clutch shudder.

In stock

$193.70 $174.33
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM EASY INSTALLATION WITHOUT ANY ADDITIONAL PARTS Designed to fit the following...
In stock

$193.70 $174.33

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$219.90 $197.91
CRG
The RC2 is a brand new version of the on-the-fly position adjustable lever, designed for OEM style master cylinders. A worthy successor to the highly...
In stock

$206.70 $186.03

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$206.70 $186.03

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$214.50 $193.05
BILLET ALUMINIUM PERFECT ANODIZED FINISH PROVIDES BETTER GRIP OVER OEM HAS OPTION FOR TWO DIFFERENT HEIGHTS EASY INSTALLATION WITHOUT ANY ADDITIONAL...
In stock

$229.32 $206.39

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock
Add to wish list

$232.70 $209.43
BILLET 7075 HARD ANODIZE SURFACE TREATMENT ALLOWS FOR THE USE OF A REMOTE ADJUSTER FOLDS IN THE CASE OF A IMPACT FOR THE INSTALLATION OF THESE LEVER...
In stock

$232.70 $209.43

DUCABIKE is synonym of passion for motorbike and in special way for Ducati bikes. Bikes can be rich and precious from owner based on own taste and need.

In stock

$240.50 $216.45
Billet aluminum with 3d tecnology Anodizing surface treatment Protect the hand-guards and handlebar in case of fall Plug and play...
In stock

$245.70 $221.13
Kit includes pair of billet brake and clutch levers Folding levers prevent damage to the master cylinder in the event of a fall or crash Round...
In stock

$258.70 $232.83
The DUCABIKE clutch slave cylinder makes for a smoother start and decreased clutch shudder. Allows the mounting kit ducabike "ccdv01" clear clutch cover,...
In stock

$258.70 $232.83
The DUCABIKE clutch slave cylinder makes for a smoother start and decreased clutch shudder. Allows the mounting kit ducabike "ccdv02" clear clutch cover,...
In stock

$265.95
DID
The newest race chain from DID is the 520ERV7. Upgraded from the 520ERV3, the 520ERV7 boasts a 3% higher tensile strength (now rated to 1000cc), a 13%...
In stock
Add to wish list

$295.00
The RCS 14mm has been designed for the rider who requires more brake performance and variation in brake lever feel when compared to a stock master cylinder....
In stock

$295.00
The RCS 16mm has been designed for the rider who requires more clutch performance and variation in clutch lever feel when compared to a stock master...
In stock

$295.95 $266.35
3D
All of our 3D chains are 120 link and come with a master link. FIVE CONCEPTS TO MAKE OUR IDEAL THREED CHAIN A REALITY Impressive Ultimate Plate Shape...
In stock

$310.70 $279.63
The DUCABIKE clutch slave cylinder makes for a smoother start and decreased clutch shudder. THE KIT ALLOWS THE ASSEMBLY OF THE KIT DUCABIKE "CCDV02" CLEAR...
In stock
Add to wish list

$310.70 $279.63
The DUCABIKE clutch slave cylinder makes for a smoother start and decreased clutch shudder. THE KIT ALLOWS THE ASSEMBLY OF THE KIT DUCABIKE "CCDV02" CLEAR...
In stock
Add to wish list

$310.95

Ducati 821 Hypermotard 2013 > 2015 8 Piece Samco Sport Silicone Coolant Hoses

In stock

$317.95 $286.15
3D
Our Exclusive SX2 Ring leads to 30% reduction of friction (compared with our existing products). Chromium Carbide pin surface coating increases hardness...
In stock