HSBK Categories HSBK Categories

 

Product filters Product filters

YZF R1

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$64.99
Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up...
In stock
Add to wish list

$69.95
R1 Custom number plates with or without your race number for race fairings. Number plate available in white, red, or yellow 4pcs Set (1 Front Plate, 2...
In stock

$425.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$425.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$525.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$495.00
The allure of going faster with less energy is appealing to almost anyone and the latest innovation to make bikes go faster is ceramic wheel bearings. Since...
In stock

$5.00
Tubing used to connect your remote fluid reservoir (brake or clutch) to your master cylinder, or for reservoir deletes. 6mm Diameter, which fits most...
In stock
Add to wish list

$530.00 $477.00
This new state-of-the-art Throttle Blipper system or Down Shifter is designed to compliment Translogic's Intellishift DCS, QSX Quckshifter systems and...
In stock
Add to wish list

$530.00 $477.00
Intellishift Quickshifter for R1 models 2002 to 2009 (fuel injected) with standard road shift or inverted race shift gear lever set-up (You will need to...
In stock

$1,209.00 $1,088.10
The TK range arises from our passion for mechanics, motorcycle racing and the elegance of “Made in Italy” products. After taking into consideration the...
In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$84.95

Precut kit includes left and right tank grips, frame grips, and center tank protector. This product is made in our Aggressive Adhesive

In stock
Add to wish list

$54.95
The Superlite RS7 Series rear sprocket is the #1 selling steel racing sprocket on the market today. The unique RS7 spoke design offers superior strength...
In stock

$29.95
Superlite "Xtreme Duty" front sprockets are manufactured to be the lightest and most durable countershaft sprockets available today. Superlite front...
In stock

$72.95
Superlite RS8-RR Series alloy race sprockets are manufactured to be extremely light yet durable for big horsepower applications. If you're looking to...
In stock

$184.95

The Sunstar 520 RTG1 Works Tripleguard Sealed Racing Chain has exclusively been used by the HSBK Racing team since 2012.

In stock
Add to wish list

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$269.00
Staubli Socket for Bleeder Plug; material: billet aluminum, anodized. This clean-break, non spill design, coupling prevents any loss of brake fluid and...
In stock
Add to wish list

$225.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$309.00
Dry Brake Socket / quick disconnect, with 20 degree banjo fitting, billet aluminum, anodized. This banjo fitting (10mm, 3/8") quick disconnect can be...
In stock
Add to wish list

$199.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$69.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$159.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$335.40
The Spider Brakes Air Ducts are made with the innovative SLS 3D printing technology. The air flow is designed to cool the pads and braking discs at specific...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$417.30 $375.57
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$517.40 $465.66
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$257.40 $231.66
Specially designed for the 2015 & Up Yamaha R1 Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use...
In stock
Add to wish list

$49.40 $44.46
Sold as a set Made in Italy
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock
Add to wish list

$63.70 $57.33
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$254.80 $229.32
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Remote Adjuster sold seperately Made in...
In stock

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M27x3 Made in Italy
In stock

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$8.95 $8.05
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$23.40 $21.06
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$76.05 $68.44
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$156.00 $140.40
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$114.40 $102.96
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock
Add to wish list

$115.70 $104.13
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$220.00 $198.00
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$257.40 $231.66
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$279.50 $251.55
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$335.21

Yamaha YZF R1 / R1M 15-19 FZ 10 / MT 10 16-19 3 Piece Thermostat Bypass Samco Sport Performance Silicone Cooling Hose Set

In stock

$123.95
Yamaha YZF R1 / R1M 15-19 FZ 10 / MT 10 16-19 3 Piece Samco Sport Performance Silicone Cooling Hose Set
In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock
Add to wish list

$249.95 $229.95
2015+ Yamaha R1 driver seat with carbon-fiber bottom and OEM attachment points RaceSeats sport seat suitable for mix road-racing and street use. Made of...
In stock
Add to wish list

$129.95 $119.55
RaceSeats universal superbike seat pad is a universal racing seat designed to fit most Superbike tail sections. Made for race and track use and attached...
In stock

$99.95 $91.95
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$269.95 $248.35
This competition step seat is designed for racing use. Covered with a 3mm layer of high density special Mousse. This is the same material chosen by most...
In stock
Add to wish list

$269.98 $248.38
This competition step seat is designed for racing use. Covered with a 3mm layer of high density special Mousse. This is the same material chosen by most...
In stock
Add to wish list

$395.00
Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view below for the tool in...
In stock
Add to wish list

$495.00
Pneumatic Preload Adjuster for Ohlins TTX shocks: V2, ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an adapter). These type of...
In stock
Add to wish list

$1,100.00
The TTX RT has a competitive price but still offers great performance for the road and track day enthusiast. The shock is based on the TTX36 with it’s race...
In stock

$1,400.00
Based on the highly regarded TTX technology it has been developed from Öhlins’ vast experience in MotoGP. Compared with the standard TTX36 MkII, the...
In stock

$1,299.00
The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3,...
In stock

$2,299.00
The new racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto2 and World Superbike championships developed by our engineers...
In stock
Add to wish list

$2,599.00
Featuring the race proven technology of our 30mm front fork cartridge kit, the compression and rebound damping systems are separated between the fork legs....
In stock
Add to wish list

$11,875.00
The FGR300 packs the very essence of advanced suspension technology. Packed with technical solutions developed in MotoGP and World Superbike, the FGR 300...
In stock

$449.00
The Öhlins world renown steering damper will help you achieve top performance with full control as you take on your journey. It can be seen as a safety...
In stock
Add to wish list

$89.95 $79.95
NGK
NGK Racing Series plugs are engineered to withstand the harshest engine conditions. Special insulator nose configurations improve throttle response....
In stock
Add to wish list

$12.25 $9.99
NGK
NGK IX Iridium Series plugs were designed specifically for the performance enthusiast. Fine wire center electrode ensures high durability and a...
In stock

$22.99 $19.98
Prevents loss of coolant due to overheating Works on most water-cooled motorcycles, snowmobiles, and ATV's Designed for hot weather and/or...
In stock
Add to wish list

$417.30 $375.57
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock

$276.90 $249.21
This performance kit, developed especially for Yamaha R1, take the braking system to an upper level. The advantages of our RBS (Racing brake System)...
In stock

$63.70 $57.33
The “Corsa” wheel axle protection are born on the race fields to simplify the change of wheels in the box and they are now available for your supersports...
In stock
Add to wish list

$78.00 $70.20
It Is essential to limit the steering angle of race motorbikes, with this racing component is not necessary any more the use of the classic balancing...
In stock
Add to wish list

$57.20 $51.48
The “Corsa” wheel axle protection are born on the race fields to simplify the change of wheels in the box and they are now available for your supersports...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the Motec C125 dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC...
In stock
Add to wish list

$51.35 $46.21
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$266.50 $239.85
Melotti Racing’s Impact Absorber for I2M Chrome has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined from...
In stock

$416.00 $374.40
Developed in co-operation with top teams in the classes SBK, SSP600, EWC (Go Eleven, Barni Racing Team, Ten Kate, Wojcik, Extreme). Technical features:...
In stock

$275.60 $248.04
The Melotti Racing Impact Absorber for AIM MXS 1.2 was conceived to protect an indispensable instrument from damage resulting from a fall. CNC...
In stock
Add to wish list

$231.40 $208.26
Melotti Racing’s Impact Absorber housing for the 2D dash. Developed to protect this indispensable dashboard from damages in case of crash. CNC machined...
In stock
Add to wish list

$387.40 $356.41
Throttle twist grip with integrated controls for Yamaha YZF-R1. New aluminium quick throttle unit much more robust option compared to the OEM fitted...
In stock
Add to wish list

$452.40 $416.21
Quick throttle unit for Yamaha YZF-R1 Digital throttle control entirely machined from solid blank. It gives riders the feeling of a traditional throttle...
In stock

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$136.50 $125.58
MUST BE USED WITH YEC ECU Constructed in special plastic material by turning and milling. Made in Italy
In stock
Add to wish list

$387.40 $356.41

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$387.40 $356.41

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$374.40 $344.45

Jetprime switch panel is interchangeable with the original one and applicable on the handlebars of any motorbike without need of minimal modification.

In stock
Add to wish list

$115.70 $106.44
Save weight and don't worry about loosing your key on your race / track bike. Will work with YEC and modified stock harness Works on USA bikes without an...
In stock
Add to wish list

$199.95
Quality European made carbon fiber for the Yamaha R6 17+ & R1 15+
In stock
Add to wish list

$199.95
Quality European made carbon for the Yamaha R1 2015+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$249.95
Quality European made carbon for the Yamaha R1 2015+ Sold as a set Attached with double sided tape (not inluded)
In stock
Add to wish list

$312.00 $280.80
I2M
The control panel has seven buttons, the two UP and DOWN above allow to directly control the chrome by connecting to the auxiliary socket for external keys...
In stock
Add to wish list

$325.00 $292.50
I2M
Our electronic remote adjuster allows you to always have under control, easily, the position of the brake lever through an immediate and precise adjustment....
In stock
Add to wish list

$78.00 $70.20
I2M
Plug & Play adapter fpr the DataLog_pro available for the following bikes. Plug&Play BMW S1000RR 09-14 adapter Plug&Play BMW S1000RR 15-18 adapter...
In stock

Contact us for a price
I2M
Danas is a free software developed in Java to be able to analyze data collected from I2M systems from miniLAP to Dasy or Chrome. The choice of developing...
In stock

$91.00 $81.90
I2M
CNC Dash Brackets make installing your I2M dash simple and effortless.
In stock
Add to wish list

$3,055.00 $2,749.50
I2M

Chrome PRO: designed for the most demanding pilot

In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play BMW S1000RR...
In stock

$2,340.00 $2,106.00
I2M

The new evolution in the Chrome family

In stock

$1,560.00 $1,404.00
I2M

Much more than a dashboard

In stock

$91.00 $81.90
I2M
Plug & Play adapters available for the following bikes. Plug&Play Aprilia RSV4 adapter Plug&Play Aprilia RSV4 17-18 adapter Plug&Play Aprilia RSV4 21+...
In stock

$250.00 $225.00
I2M
A carbon cover for both Chrome Lite and for Chrome Plus. It protects the aluminum case from sractches and dirt in case of a crash. The cover is easily...
In stock
Add to wish list

$351.00 $315.90
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock

$286.00 $257.40
I2M
Our ABS emulators allow you to remove the entire ABS block. All the circuits necessary to avoid any error in the control unit are reproduced inside our...
In stock
Add to wish list

$6.95 $5.56
HRT
Titanium Rear Brake Caliper Mount Bolts Titanium is the strongest when compared to other metals. Its unsurpassed strength-to-weight makes it perfect when...
In stock
Add to wish list