Spider

$63.70 $57.33
Sprocket cover combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact, they’re designed to...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$517.40 $465.66
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$49.40 $44.46
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock
Add to wish list

$403.00 $362.70
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$517.40 $465.66
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$517.40 $465.66
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$257.40 $231.66
Specially designed for the 2017 & Up Yamaha R6 6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed...
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock
Add to wish list

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock

$31.20 $28.08
Single Cover Made in Italy
In stock
Add to wish list

$50.70 $45.63
Reduces the steering angle Racing / track use only Horn will need to be removed for installtion Made in Italy
In stock
Add to wish list

$218.40 $196.56
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Remote Adjuster sold seperately Made in...
In stock

$318.50 $286.65
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$257.40 $231.66
6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use Made in Italy Also...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$417.30 $375.57
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$517.40 $465.66
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$257.40 $231.66
Specially designed for the 2015 & Up Yamaha R1 Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use...
In stock
Add to wish list

$49.40 $44.46
Sold as a set Made in Italy
In stock
Add to wish list

$286.00 $257.40
Spider Chain Adjusters allow for quick and precise chain adjustments that makes chain adjustments a snap. Rather than guessing the axle’s position, micro...
In stock
Add to wish list

$63.70 $57.33
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$140.14 $126.13
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$254.80 $229.32
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Remote Adjuster sold seperately Made in...
In stock

$76.70 $69.03
Designed for race / track use. Made in Italy
In stock

$55.90 $50.31
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$388.70 $349.83
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M27x3 Made in Italy
In stock

$49.40 $44.46
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$180.70 $162.63
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$38.35 $34.51
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$58.50 $52.65
Spider Universal 14mm Fork Pre-Load Adjuster 1 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$49.40 $44.46
Spider Universal 14mm Fork Pre-Load Adjusters 2 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $10.80
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.00
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$127.40 $114.66
Levers made from Aluminum billet and completely CNC machined; This Levers has been used in the Racing industry for many years due to its technical...
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$557.70 $501.93
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$239.20 $215.28
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$62.40 $56.16
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$557.70 $501.93
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock

$76.70 $69.03
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$24.70 $22.23
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$517.40 $465.66
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$340.60 $306.54
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$31.20 $28.08
Billet oil fill cap with pre-drilled hole for safety wire M30x1.5 Made in Italy
In stock

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy Designed for the following bikes 18 ZX-6R 16...
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$218.40 $196.56
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Will also fit the Tuono V4 Factory that...
In stock

$413.40 $372.06
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$102.70 $92.43
Machined from solid billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$338.00 $304.20
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$416.00 $374.40
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$557.70 $501.93
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy Designed for the following models Ninja 400 (all...
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$149.50 $134.55
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$276.90 $249.21
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock

$340.60 $306.54
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock

$257.40 $231.66
6.5 degree 42mm offset Machined from solid billet aluminium Included a pair of Derlin bar-ends Designed for track / racing use Made in Italy Also...
In stock
Add to wish list

$340.60 $306.54
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$344.50 $310.05
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$377.00 $339.30
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$340.60 $306.54
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$546.22 $491.60
Designed for the new 2020 Honda CBRR-R 1000 with the feedback from the factory WSBK team. Maximum precision, lightness, durability and reliability...
In stock

$416.00 $374.40
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$63.70 $57.33
Machined from solid billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$76.70 $69.03
Machined from solid billet aluminium Perfect anodized finish 4 Pcs Set Designed for track / racing use Made in Italy Also available individually...
In stock
Add to wish list

$83.20 $74.88
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$127.40 $114.66
Levers are made from Aluminum billet and completely CNC machined; This Levers has been used in the Racing industry for many years due to its technical...
In stock
Add to wish list

$127.40 $114.66
Levers made from Aluminum billet and completely CNC machined; This Levers has been used in the Racing industry for many years due to its technical...
In stock

$76.70 $69.03
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$416.00 $374.40
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$234.00 $210.60
Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash Designed for...
In stock
Add to wish list

$557.70 $501.93
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$388.70 $349.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$117.00 $105.30
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy
In stock
Add to wish list

$49.40 $44.46
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$70.20 $63.18
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$45.50 $40.95
These are designed for the Spider EVO rearsets Machined from solid billet aluminum Perfect anodized finish Sold individually Made in Italy
In stock

$136.50 $122.85
Made in Italy
In stock
Add to wish list

$323.70 $291.33
Machined from solid billet aluminium Included a pair of Derlin bar-ends Steering damper bracket included Designed for 53mm forks Designed for track /...
In stock
Add to wish list

$481.00 $432.90
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$279.50 $251.55
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$663.00 $596.70
Special rearsets designed for the introduction of the Ducati into the WSS championship. Machined from solid billet aluminum Perfect anodized finish...
In stock

$481.00 $432.90
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$630.50 $567.45
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock

$258.70 $232.83
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$812.50 $731.25
Features: GP shift only High-grip knurl foot & toe pegs Includes all necessary mounting hardware Clear or Black anodized finish Rear...
In stock

$227.50 $204.75
Aluminum guard machined from solid billet. Designed and manufactured by Spider Special reinforced sliders at points where it could make contact to ensure...
In stock
Add to wish list

$279.50 $251.55
Special cover to help cool the dry clutch by bringing up to 300% more air into the clutch Aluminum guard machined from solid billet. Designed and...
In stock

$370.50 $333.45
Made from solid piece of billet. The clutch cover is reinforced with a special slider in the areas that would make contact in the event of a fall to...
In stock
Add to wish list

$1,233.70 $1,110.33
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock
Add to wish list

$812.50 $731.25
Spider designs and builds their rearsets based on four key areas: function, durability, ease of repair, and finish. First, the rearsets must function beyond...
In stock